Difference between revisions of "DashCam First Start"

From Wiki Knowledge Base | Teltonika GPS
(Created page with "__TOC__ ==How to insert SD card== Teltonika DualCam can hold 2 x microSD cards, which are inserted on both sides of the camera (front and rear). <br> When the card is inserted...")
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
__TOC__
 
__TOC__
 
==How to insert SD card==
 
==How to insert SD card==
−
Teltonika DashCam can hold 1 x microSD card, which are inserted on both sides of the camera (front). <br>
+
Teltonika DualCam can hold 2 x microSD cards, which are inserted on both sides of the camera (front and rear). <br>
 
When the card is inserted correctly, it locks in with a "click". How the cards are inserted is depicted in the photos.
 
When the card is inserted correctly, it locks in with a "click". How the cards are inserted is depicted in the photos.
  
−
'''NOTE:''' If you do not insert microSD card, you will be only available to receive images, but you do not receive video if the trigger will happen or you will send SMS/GPRS command.
+
'''NOTE:''' If you do not insert microSD cards, you will be only available to receive images, but you do not receive video if the trigger will happen or you will send SMS/GPRS command.
  
−
[[image:548772 DASHBOARD 1.jpg|400px]]
+
[[image:Dual_camera_MicroSD_card_insert_1.png|400px]]
 +
[[image:Dual_camera_MicroSD_card_insert_2.png|400px]]
  
 
==Mounting recommendation==
 
==Mounting recommendation==
  
 
Camera location:
 
Camera location:
−
* Camera must be mounted on the windshield of the, you can stick it to window using 3M duct tape, or you can use screws fit to other surfaces.
+
* Camera must be mounted as shown in the picture below, you can stick it to window using 3M duct tape, or you can use screws fit to other surfaces.
−
* To maximize the field of view, the camera should be mounted in the middle of the front windshield so that an even field of view for the sides of the vehicle is recorded. We recommend you mount the DashCam near the rearview mirror area.  
+
[[File:Dualcam mounting.jpeg|371x371px]]
 +
* To maximize the field of view, the camera should be mounted in the middle of the front windshield so that an even field of view for the sides of the vehicle is recorded. We recommend you mount the Dual Cam near the rearview mirror area.  
 
* We always recommend angling the lens slightly upwards so that video footage displays about 60% road and 40% sky. This angle offers a good balance of exposure and details.  
 
* We always recommend angling the lens slightly upwards so that video footage displays about 60% road and 40% sky. This angle offers a good balance of exposure and details.  
−
* View footage from SD card while mounting the DashCam so you can select what position and angle you prefer the DashCam to be set at.  
+
* View footage from SD card while mounting the Dual Cam so you can select what position and angle you prefer the Dual Cam to be set at.  
  
 +
Rear camera adjusting:
  
 +
[[image:Dual camera rotation 1.png|200px]]
 +
[[image:Dual camera rotation 2.png|200px]]
 +
[[image:Dual camera rotation 3.png|200px]]
 +
[[image:Dual camera rotation 4.png|200px]]
  
 +
* Gently remove the cover from the case of the top camera. After the cover is removed you will see the screw.
 +
* Unscrew it and rotate the rear camera to adjust the better view of the cabin. The rear camera contains infrareds on it.
 +
* Put the cover back on the camera.
  
 
Connecting power source:
 
Connecting power source:
Line 27: Line 37:
  
 
==Installation==
 
==Installation==
−
To connect the DashCam to a supported device, you have to make sure to connect 4 PINs of the camera to the PINs of your device correctly.
+
To connect the DualCam to a supported device, you have to make sure to connect 4 PINs of the camera to the PINs of your device correctly.
  
−
'''NOTE:''' DashCam must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.
+
'''NOTE:''' Dual Cam must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.
  
  
−
[[File:2Dashcam ignition connection.jpg|frameless|928x928px]]
+
[[File:443035 Teltonika DualCam Wiki Knowledge Base Teltonika GPS 1.2.jpg|frameless|928x928px]]
  
−
If you need to receive additional data from the DashCam when the ignition is off, you can do it by connecting the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit [https://wiki.teltonika-gps.com/view/FMB_setdigout FMB DOUT].
+
If you need to receive additional data from the DualCam when the ignition is off, you can do it by connecting the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit [https://wiki.teltonika-gps.com/view/FMB_setdigout FMB DOUT].
  
 
[[File:Reley2.PNG|frameless|928x928px]]
 
[[File:Reley2.PNG|frameless|928x928px]]
−
 
−
'''DASHCAM FMC650 Installation with Ignition Source'''. To connect the DashCam to the FMC650 device, you have to make sure to connect 4 PIN's of the camera to the PIN's of your device correctly.
 
−
 
−
'''NOTE:''' DashCam must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.
 
−
 
−
'''NOTE: Also, you need to buy a RJ45 cable and some RJ45 cables have two modifications, some have RS232 output on 3/4 pins some on 5/6 pins'''
 
−
 
−
[[File:DashCam and FMC650 Ignition source.png|frameless|928x928px]]
 
−
 
−
'''DASHCAM FMC650 Installation with Relay'''. If you need to receive additional data from the DashCam when the ignition is off, you can also connect the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit [[FMB setdigout|FMB DOUT]].
 
−
 
−
[[File:DashCam and FMC650 relay.png|frameless|928x928px]]
 
−
 
−
'''Two cameras FMC650 Installation with Ignition Source'''. To connect the two cameras to the FMC650 device, you have to make sure to connect 4 PIN's of the camera to the PIN's of your device correctly.
 
−
 
−
'''NOTE:''' Two cameras must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.
 
−
 
−
[[File:688548 DualCam and DSM with FMC650.jpg]]
 
−
 
−
'''Two cameras FMC650 Installation with Relay'''. If you need to receive additional data from the Two cameras or one of them when the ignition is off, you can also connect the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit [[FMB setdigout|FMB DOUT]].
 
−
 
−
[[File:2 cameras dout.JPG|frameless|928x928px]]
 
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 69: Line 57:
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |1
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |1
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<span style="color:#008000">'''RS232-Tx'''</span>
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<span style="color:#008000">'''RS232-Tx'''</span>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Dashcam output for data transmission through RS232
+
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |DualCam output for data transmission through RS232
 
|-
 
|-
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |2
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |2
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<span style="color:#D8D800">'''RS232-Rx'''</span>
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<span style="color:#D8D800">'''RS232-Rx'''</span>
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |DashCam input for data reception through RS232
+
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |DualCam input for data reception through RS232
 
|-
 
|-
 
|-
 
|-
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |3
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |3
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<span style="color:#FF0000">'''VCC(9-36V)''' </span>(+)
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |<span style="color:#FF0000">'''VCC(9-36V)''' </span>(+)
−
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Power supply for the DashCam
+
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Power supply for the DualCam
 
|-
 
|-
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |4
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |4
Line 86: Line 74:
 
<br>
 
<br>
  
−
[[Category:Teltonika DashCam]]
+
[[Category:Teltonika DualCam]]

Revision as of 10:06, 20 March 2023

Main Page > Video Solutions > Teltonika DashCam > DashCam First Start

How to insert SD card

Teltonika DualCam can hold 2 x microSD cards, which are inserted on both sides of the camera (front and rear).
When the card is inserted correctly, it locks in with a "click". How the cards are inserted is depicted in the photos.

NOTE: If you do not insert microSD cards, you will be only available to receive images, but you do not receive video if the trigger will happen or you will send SMS/GPRS command.

Dual camera MicroSD card insert 1.png Dual camera MicroSD card insert 2.png

Mounting recommendation

Camera location:

  • Camera must be mounted as shown in the picture below, you can stick it to window using 3M duct tape, or you can use screws fit to other surfaces.

Dualcam mounting.jpeg

  • To maximize the field of view, the camera should be mounted in the middle of the front windshield so that an even field of view for the sides of the vehicle is recorded. We recommend you mount the Dual Cam near the rearview mirror area.
  • We always recommend angling the lens slightly upwards so that video footage displays about 60% road and 40% sky. This angle offers a good balance of exposure and details.
  • View footage from SD card while mounting the Dual Cam so you can select what position and angle you prefer the Dual Cam to be set at.

Rear camera adjusting:

Dual camera rotation 1.png Dual camera rotation 2.png Dual camera rotation 3.png Dual camera rotation 4.png

  • Gently remove the cover from the case of the top camera. After the cover is removed you will see the screw.
  • Unscrew it and rotate the rear camera to adjust the better view of the cabin. The rear camera contains infrareds on it.
  • Put the cover back on the camera.

Connecting power source:

  • Due to high camera power consumption we always recommend connecting the camera to the vehicle ignition. The camera start-up in 2-3 seconds when vehicle ignition goes ON.
  • Camera ground (Black cable) must be connected to the same (common) Ground wire as FMx125 device.
  • Ground wire is connected to the vehicle frame or metal parts that are fixed to the frame.

Please refer to FMx125 device mounting recommendation: https://wiki.teltonika-gps.com/view/FMC125_First_Start#Mounting_recommendations

Installation

To connect the DualCam to a supported device, you have to make sure to connect 4 PINs of the camera to the PINs of your device correctly.

NOTE: Dual Cam must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.


443035 Teltonika DualCam Wiki Knowledge Base Teltonika GPS 1.2.jpg

If you need to receive additional data from the DualCam when the ignition is off, you can do it by connecting the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit FMB DOUT.

Reley2.PNG

PIN NUMBER PIN NAME

DESCRIPTION

1 RS232-Tx DualCam output for data transmission through RS232
2 RS232-Rx DualCam input for data reception through RS232
3 VCC(9-36V) (+) Power supply for the DualCam
4 GND (-) Ground


Retrieved from "https://wiki.teltonika-gps.com/index.php?title=DashCam_First_Start&oldid=81509"