Difference between revisions of "CAN Adapter update"
From Wiki Knowledge Base | Teltonika GPS
| Line 6: | Line 6: | ||
*A correct firmware version must be uploaded to the FM device. Currently this feature is only supported with firmware version 03.25.11.Rev141. If, firmware version is correct, a small, blue, „CAN“ logo will appear next to the device‘s model: | *A correct firmware version must be uploaded to the FM device. Currently this feature is only supported with firmware version 03.25.11.Rev141. If, firmware version is correct, a small, blue, „CAN“ logo will appear next to the device‘s model: | ||
| − | [[Image:FM registered. | + | [[Image:FM registered.jpg|799x133px|center]] |
| Line 15: | Line 15: | ||
*A current version of the CAN adapter version can be checked by pressing a small „i“ button on the right. All FM device‘s and CAN adapter‘s details are listed in one window: | *A current version of the CAN adapter version can be checked by pressing a small „i“ button on the right. All FM device‘s and CAN adapter‘s details are listed in one window: | ||
| − | [[Image:FM OldDate. | + | [[Image:FM OldDate.jpg|1817x443px|center]] |
| Line 29: | Line 29: | ||
*If the software is not up-to-date it can be updated in the main window. A chech-box neets to be ticked, then „Actions“ button pressed and „Update CAN adapter firmware“ selected: | *If the software is not up-to-date it can be updated in the main window. A chech-box neets to be ticked, then „Actions“ button pressed and „Update CAN adapter firmware“ selected: | ||
| − | [[Image:FM SelectedCAN. | + | [[Image:FM SelectedCAN.jpg|1626x481px|center]] |
| Line 45: | Line 45: | ||
*Once the update task has been assigned, it can be seen in the main window: | *Once the update task has been assigned, it can be seen in the main window: | ||
| − | [[Image:FM Assigned. | + | [[Image:FM Assigned.jpg|1629x313px|center]] |
| Line 58: | Line 58: | ||
*When the update is finished, a new software version can be seen in the details window: | *When the update is finished, a new software version can be seen in the details window: | ||
| − | [[Image:FM Done. | + | [[Image:FM Done.jpg|1824x438px|center]] |
Revision as of 15:15, 25 October 2019
Main Page > Frequently Asked Questions - FAQ > CAN Adapter updateTeltonika is proud to announce a new, easier way to update Teltonika‘s LV-CAN200, ALL-CAN300 and CAN-CONTROL adapter‘s firmware by using Fota Web. The feature is also supported by our fresh FMB140 device which has a built-in CAN bus reading adapter. This is an excellent solution because a special cable is not needed anymore and the firmware can be updated remotely, without having to dismount the CAN adapter (or FMB140 device) from the vehicle. Upgrading the software of a CAN adapter will add more program numbers, in other words – more vehicle models will be supported.
In order to update your device‘s firmware please follow a quick and simple step-by-step guide which is below. The procedure is the same for all devices.
- FM device, which is connected to the CAN adapter (or FMB140), must be registered in Fota Web – device‘s model, firmware version, serial number and other information must be shown.
- A correct firmware version must be uploaded to the FM device. Currently this feature is only supported with firmware version 03.25.11.Rev141. If, firmware version is correct, a small, blue, „CAN“ logo will appear next to the device‘s model:
- A current version of the CAN adapter version can be checked by pressing a small „i“ button on the right. All FM device‘s and CAN adapter‘s details are listed in one window:
- If the software is not up-to-date it can be updated in the main window. A chech-box neets to be ticked, then „Actions“ button pressed and „Update CAN adapter firmware“ selected:
- Once the update task has been assigned, it can be seen in the main window:
- When the update is finished, a new software version can be seen in the details window:
