Difference between revisions of "Custom Vehicle Types"

From Wiki Knowledge Base | Teltonika GPS
Line 1: Line 1:
 
__TOC__
 
__TOC__
== Custom vehicle types ==
+
==Custom vehicle types==
  
 
Custom vehicle types tab Figure 1 allow s configuring vehicle types , which are used for immobilizer scenario.
 
Custom vehicle types tab Figure 1 allow s configuring vehicle types , which are used for immobilizer scenario.
Line 8: Line 8:
  
 
The Custom vehicle types tab is used when the Vehicle type parameter ID 65100 ) is set to Other (13).
 
The Custom vehicle types tab is used when the Vehicle type parameter ID 65100 ) is set to Other (13).
Based o n what number is provided in the field Other vehicle ty pe ID the functionality chooses
+
Based on what number is provided in the field Other vehicle type ID the functionality chooses
corresponding row s from the table accordingly to decide whether the vehicle can or can't be started.
+
corresponding rows from the table accordingly to decide whether the vehicle can or can't be started.
  
== Functionality during sleep modes ==
+
==Functionality during sleep modes==
 
<br>
 
<br>
 
If the card is swiped during device sleep (ignition not yet turned on), then the devices waits for
 
If the card is swiped during device sleep (ignition not yet turned on), then the devices waits for

Revision as of 16:49, 2 April 2020

Main Page > EOL Products > FMU126 > FMU126 Configuration > Custom Vehicle Types

Custom vehicle types

Custom vehicle types tab Figure 1 allow s configuring vehicle types , which are used for immobilizer scenario.

Figure 1 Custom Vehicle Types


The Custom vehicle types tab is used when the Vehicle type parameter ID 65100 ) is set to Other (13). Based on what number is provided in the field Other vehicle type ID the functionality chooses corresponding rows from the table accordingly to decide whether the vehicle can or can't be started.

Functionality during sleep modes


If the card is swiped during device sleep (ignition not yet turned on), then the devices waits for device wake up and then decides if the driver can start the vehicle via immobilizer scenario. The device waits for 15 seconds since the card is swiped if more time has passed, a repeat swipe is required.