LV-CAN200

LV-CAN200 is designed to acquire CAN Bus data from:

• Light vehicles (including electric cars)
• Trucks
• Buses and coaches

Access to CAN Bus data enables fleet operators to report on a wide range of information. You can effectively identify areas of improvement within their vehicle operation to drive down overheads and minimize environmental impact.

Supported vehicles features*

1. Total fuel consumption
2. Fuel level (Dashboard)
3. Vehicle mileage — Vehicle mileage from dashboard or Vehicle mileage counted (from adapter installation)
4. Door status — Front left door, Front right door, Rear right door, Rear left door, Trunk cover, Engine cover (hood)
5. Engine speed (RPM)
6. Oil pressure/level status
7. Engine temperature
8. Vehicle speed
9. Accelerator pedal position
10. CNG level
11. Total CNG consumption
12. Engine is working on CNG
13. DTC fault code reading**

* Number of parameters depends on vehicle model, year and equipment.

** For LVCAN200 + DTC adapter only

Supported vehicles list

LV-CAN200 supported vehicle list:

• To download the xlsx version of supported vehicle list for LV-CAN200 adapter, click here
• To download the xlsx version of supported vehicle list for LV-CAN200 + DTC adapter, click here

Technical features

PARAMETER	VALUE
	Minimum	Typical	Typical	Maximum	Unit
Supply Voltage
Supply Voltage (Recommended Operating Conditions)	+9	+12	+24	+63	V
Current Consumption
Working Mode		10,6	5,3		mA
Sleep Mode		0,4	0,2		mA
Operating Temperature
Operating Temperature	-40			+85	°C

Adapter changes

Manufacture date	Software date	Program No. digits	Program No. in connection scheme	Changes
>= 2018-01-01	>= 2018-01-01	5	XXXX → XXXXX	New Program numbers consist of 5 digits. Digit "1" was added in front of existing Program numbers. For example 1882 → 11882. The screw is moved by 0,5 cm compared to previous model.
<2018-01-01	>= 2017-09-01	4	XXX → XXXX	New Program numbers consist of 4 digits. Digit "1" was added in front of existing Program numbers. For example: 882 → 1882.
	< 2017-09-01	3	XXX

Memberships

• WEEE

Certification & Approvals

• LV-CAN200 RoHS

Nomenclature, classification codes

• LV-CAN200 LITAR
• LV-CAN200 ECCN

FAQ

How to connect LV-CAN200 to:

• • FMB110
  • FMB120
  • FMB122
  • FMB125
  • FMB130
  • FMB640
  • FMU125
  • FMU126
  • FMU130
  • FMC125
  • FMC130
  • FMC640
  • FMM125
  • FMM130
  • FMM640

How to connect LV-CAN200 to EOL products:

• • FMA110
  • FMA120
  • FMB630
  • FM6300
  • FM6320
  • FM36M1
  • FM3622
  • FM3612

• Troubleshooting LV-CAN200, ALL-CAN300, CAN-CONTROL
• Connection scheme shows the use of a resistor. What power resistor should I choose?
• Connection scheme shows two CAN wires of the same color connected to one connector
• How to capture CAN adapter log from FMX1YX?
• How to capture CAN adapter log from FM device?
• How to update CAN adapter Over The Air
• Immobilizing and locking issues using CAN-Control with Immobilizer
• CAN adapter supported vehicles
• What to do if the FM device shows old program number instead of new configured one?

Product Change Notifications

LV-CAN200 Product Change Notifications

Promotional Material

LV-CAN200 Promotional Material

Downloads

Manual & Documentation

	LV-CAN200 Datasheet (EN)	(Updated on: 2023-07-03
	CAN ADAPTERS flyer (EN)	(Updated on: 2023-06-22)

External Links

https://teltonika-gps.com/product/lv-can200