LV-CAN200
Revision as of 10:59, 12 August 2024 by Justinas.strelciunas (talk | contribs) (→Supported vehicles list)
Main Page > CAN Trackers & Adapters > LV-CAN200
LV-CAN200 is designed to acquire CAN Bus data from:
- Light vehicles (including electric cars)
- Trucks
- Buses and coaches
Access to CAN Bus data enables fleet operators to report on a wide range of information. You can effectively identify areas of improvement within their vehicle operation to drive down overheads and minimize environmental impact.
Supported vehicles features*
- Total fuel consumption
- Fuel level (Dashboard)
- Vehicle mileage — Vehicle mileage from dashboard or Vehicle mileage counted (from adapter installation)
- Door status — Front left door, Front right door, Rear right door, Rear left door, Trunk cover, Engine cover (hood)
- Engine speed (RPM)
- Oil pressure/level status
- Engine temperature
- Vehicle speed
- Accelerator pedal position
- CNG level
- Total CNG consumption
- Engine is working on CNG
- DTC fault code reading**
* Number of parameters depends on vehicle model, year and equipment.
** For LVCAN200 + DTC adapter only
Supported vehicles list
LV-CAN200 supported vehicle list:
- To download the xlsx version of supported vehicle list for LV-CAN200 adapter, click here
- To download the xlsx version of supported vehicle list for LV-CAN200 + DTC adapter, click here
Technical features
PARAMETER | VALUE | ||||
---|---|---|---|---|---|
Minimum | Typical | Typical | Maximum | Unit | |
Supply Voltage | |||||
Supply Voltage (Recommended Operating Conditions) | +9 | +12 | +24 | +63 | V |
Current Consumption | |||||
Working Mode | 10,6 | 5,3 | mA | ||
Sleep Mode | 0,4 | 0,2 | mA | ||
Operating Temperature | |||||
Operating Temperature | -40 | +85 | °C |
Adapter changes
Manufacture date | Software date | Program No. digits | Program No. in connection scheme | Changes |
---|---|---|---|---|
>= 2018-01-01 | >= 2018-01-01 | 5 | XXXX → XXXXX |
|
<2018-01-01 | >= 2017-09-01 | 4 | XXX → XXXX |
|
< 2017-09-01 | 3 | XXX |
Memberships
Certification & Approvals
Nomenclature, classification codes
FAQ
How to connect LV-CAN200 to:
How to connect LV-CAN200 to EOL products:
- Troubleshooting LV-CAN200, ALL-CAN300, CAN-CONTROL
- Connection scheme shows the use of a resistor. What power resistor should I choose?
- Connection scheme shows two CAN wires of the same color connected to one connector
- How to capture CAN adapter log from FMX1YX?
- How to capture CAN adapter log from FM device?
- How to update CAN adapter Over The Air
- Immobilizing and locking issues using CAN-Control with Immobilizer
- CAN adapter supported vehicles
- What to do if the FM device shows old program number instead of new configured one?
YouTube
Product Change Notifications
Promotional Material
Downloads
Manual & Documentation
LV-CAN200 Datasheet (EN) | (Updated on: 2023-07-03 | ||
CAN ADAPTERS flyer (EN) | (Updated on: 2023-06-22) |