ALL-CAN300

Main Page > CAN Trackers & Adapters > ALL-CAN300

ALL-CAN300 is designed to acquire CAN Bus data from:

Light vehicles (including electric cars)
Trucks
Buses and coaches
Agriculture transport
Special transport (Utility, Forest, Construction machinery)

The communication network can provide a wide range of data that can be used to reduce running costs, improve driver safety, streamline maintenance processes, and support environmental responsibility.

Supported vehicles features*

CAN bus data

Total fuel consumption
Fuel level (Dashboard) — Fuel level - percent or Fuel level - Liters
Vehicle mileage — Vehicle mileage from dashboard or Vehicle mileage counted (from adapter installation)
Door status — Front left door, Front right door, Rear right door, Rear left door, Trunk cover, Engine cover (hood)
Engine speed (RPM)
Oil pressure/level status
Engine temperature
Vehicle speed
Accelerator pedal position
VIN number (Only available using FMB140+ALLCAN300 hardware option)
Lights status (Parking, Dipped, Full beam, Front/Rear fog lights)
CNG level
Total CNG consumption
Engine is working on CNG status
AdBlue level (Dashboard)
Webasto
SIMPLE TACHO
Seat belt status (Driver's seat belt, Passenger's set belt)
Check engine, Lights failure, Low tire pressure... statuses
AND MORE...

Electric vehicles CAN bus data

Charging cable status
Charging status
Battery level
Vehicle range on battery
Battery temperature

Trucks, Buses, Agriculture and Special transport CAN bus data

Axles loads
Harvesting time
Harvested area
Grain mown volume
Grain moisture
Harvesting drum RPM
Mowing status
Threshing status
Joystick status
Light signal turned on status
Grain tank status
Hydraulic status
Sprinkling status
AND MORE...

* Number of parameters depends on vehicle model, year and equipment.

Supported vehicles list

ALL-CAN300 supported vehicle list:

To download the xlsx version of supported vehicle list for ALL-CAN300, click here.

Technical features


PARAMETER	VALUE
PARAMETER	Minimum	Typical	Typical	Maximum	Unit
Supply Voltage
Supply Voltage (Recommended Operating Conditions)	+9	+12	+24	+63,5	V
Current Consumption
Working Mode		23,5	11,5		mA
Sleep Mode		0,4	0,33		mA
Operating Temperature
Operating Temperature	-40			+85	°C

Adapter changes


Manufacture date	Software date	Program No. digits	Program No. in connection scheme	Changes
>= 2018-01-01	>= 2018-01-01	5	XXXX → XXXXX	New Program numbers consist of 5 digits. Digit "1" was added in front of existing Program numbers. For example 1882 → 11882. The screw is moved by 0,5 cm compared to previous model.
<2018-01-01	>= 2017-09-01	4	XXX → XXXX	New Program numbers consist of 4 digits. Digit "1" was added in front of existing Program numbers. For example: 882 → 1882.
<2018-01-01	< 2017-09-01	3	XXX