CAN-CONTROL
Revision as of 08:56, 12 December 2024 by Justinas.strelciunas (talk | contribs) (→Supported vehicles list)
Main Page > CAN Trackers & Adapters > CAN-CONTROL
CAN-CONTROL is designed to acquire CAN Bus data and remotely control:
- Light vehicles (including electric cars)
Teltonika delivers a solution for car sharing and mobility applications. CAN-CONTROL allows to read essential CAN Bus data from the vehicle and remotely control doors (lock/ unlock) and windows.
Supported vehicles features*
Control features
- Central lock control
- Turn signal control
- Comfort closure (Central locking, Windows, Power folding mirrors)
- Trunk release
- Factory alarm management
- Control central lock when ignition is on
CAN bus data
- Total fuel consumption
- Fuel level (Dashboard) — Fuel level - percent or Fuel level - Liters
- Vehicle mileage — Vehicle mileage from dashboard or Vehicle mileage counted (from adapter installation)
- Door status — Front left door, Front right door, Rear right door, Rear left door, Trunk cover, Engine cover (hood)
- Engine speed (RPM)
- Oil pressure/level status
- Engine temperature
- Vehicle speed
- Accelerator pedal position
- VIN number
- Lights status (Parking, Dipped, Full beam, Front/Rear fog lights)
- CNG level
- Total CNG consumption
- Engine is working on CNG status
- AND MORE...
Electric vehicles CAN bus data
- Charging cable status
- Charging status
- Battery level
- Vehicle range on battery
* Number of features depends on vehicle model, year and equipment.
Supported vehicles list
CAN-CONTROL supported vehicle list:
- To download the xlsx version of supported vehicle list for CAN-CONTROL, click here.
- To download the xlsx version of supported vehicle list for CAN-CONTROL + DTC, click here.
- To download the xlsx version of supported vehicle list for CAN-CONTROL + IMMO, click here.
- To download the xlsx version of supported vehicle list for CAN-CONTROL + IMMO DIG1, click here.
Technical features
PARAMETER | VALUE | |||
---|---|---|---|---|
Minimum | Typical | Maximum | Unit | |
Supply Voltage | ||||
Supply Voltage (Recommended Operating Conditions) | +9 | +12 | +16 | V |
Current Consumption | ||||
Working Mode (with 12V) | 23,6 | mA | ||
Sleep Mode (with 12V) | 0,95 | mA | ||
Operating Temperature | ||||
Operating Temperature | -40 | +85 | °C |
Certification & Approvals
Memberships
Certification & Approvals
Nomenclature, classification codes
FAQ
- How to connect CAN-CONTROL to:
- Troubleshooting LV-CAN200, ALL-CAN300, CAN-CONTROL
- Connection scheme shows the use of a resistor. What power resistor should I choose?
- Connection scheme shows two CAN wires of the same color connected to one connector
- How to capture CAN adapter log from FMX1YX?
- How to capture CAN adapter log from FM device?
- How to update CAN adapter Over The Air
- Immobilizing and locking issues using CAN-Control with Immobilizer
- CAN adapter supported vehicles
- What to do if the FM device shows old program number instead of new configured one?
Product Change Notifications
CAN-CONTROL Product Change Notifications
Promotional Material
CAN-CONTROL Promotional Material
Downloads
Manual & Documentation
CAN-CONTROL Datasheet (EN) | (Updated on: 2023-07-03) | ||
CAN ADAPTERS flyer (EN) | (Updated on: 2023-06-22) |
Additional information
https://teltonika-gps.com/products/accessories/can-adapters/can-control
For EOL policy please refer to link here.