SIMPLE-CAN
From Wiki Knowledge Base | Teltonika GPS
Revision as of 17:43, 10 December 2018 by Berankis.si (talk | contribs)
Main Page > EOL Products > SIMPLE-CAN
SIMPLE-CAN is contactless adapter used to read vehicle CAN data with:
Features
- SIMPLE-CAN collects vehicle data from CAN bus without damaging the wires
- Powered from on-board power source
- Reads the signals through the isolation of CAN bus wires
- Easy to install and operate
Technical details
| PARAMETER | VALUE | ||||
|---|---|---|---|---|---|
| Minimum | Typical | Typical | Maximum | Unit | |
| Supply Voltage | |||||
| Supply Voltage (Recommended Operating Conditions) | +9 | +12 | +24 | +63,5 | V |
| Current Consumption | |||||
| Working Mode | 8,3 | 4,3 | mA | ||
| Sleep Mode | 1,6 | 0,91 | mA | ||
| Operating Temperature | |||||
| Operating Temperature | -40 | +85 | °C | ||
- Dimensions 41,0 x 42,1 x 14,5 mm
- Weight 23,6 g
- CAN-BUS speeds from 33,33 to 500 kb/s
- Automatically sets CAN Low, CAN High polarity
- Automatically adjusts signal level and speed
External Links
YouTube
Teltonika CAN adapters Part 1: Introduction
Teltonika CAN adapters Part 2: Installation
FAQ
- How to install SIMPLE-CAN with LVCAN-200 and ALLCAN-300 usig FM device:
