Custom Vehicle Types

From Wiki Knowledge Base | Teltonika GPS
Revision as of 23:48, 2 April 2020 by Sandra.Gasyte (talk | contribs) (Protected "Custom Vehicle Types" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > EOL Products > FMU126 > FMU126 Configuration > Custom Vehicle Types

Custom vehicle types

Custom vehicle types tab Figure 1 allow s configuring vehicle types , which are used for immobilizer scenario.

Figure 1 Custom Vehicle Types

The Custom vehicle types tab is used when the Vehicle type parameter ID 65100 ) is set to Other (13). Based on what number is provided in the field Other vehicle type ID the functionality chooses corresponding rows from the table accordingly to decide whether the vehicle can or can't be started. Full parameter list: Custom Vehicle Types parameter list

Functionality during sleep modes

If the card is swiped during device sleep (ignition not yet turned on), then the devices waits for device wake up and then decides if the driver can start the vehicle via immobilizer scenario. The device waits for 15 seconds since the card is swiped if more time has passed, a repeat swipe is required.