ECAN02: Difference between revisions

From Teltonika Telematics Wiki
No edit summary
(4 intermediate revisions by 2 users not shown)
Line 82: Line 82:
*Dimensions 39 x 12 x 19 mm
*Dimensions 39 x 12 x 19 mm
*CAN-BUS speeds up to 1000 kb/s
*CAN-BUS speeds up to 1000 kb/s
*ECAN02 is manufactured and meant to be used only with Teltonika devices. Cannot guarantee expected quality with 3rd party devices
*Fuse is protecting devices from high current peaks. If the voltage exceeds 33V (i.e. 35V) then protection diode stabilizes device voltage to 33V and the current value will increase accordingly.
*Fuse is protecting devices from high current peaks. If the voltage exceeds 33V (i.e. 35V) then protection diode stabilizes device voltage to 33V and the current value will increase accordingly.


Line 138: Line 139:


* [[ECAN02 WEEE|WEEE]]
* [[ECAN02 WEEE|WEEE]]
==Certification & Approvals==
*[[ECAN02 RoHS]]


==Nomenclature, classification codes==
==Nomenclature, classification codes==
*[[ECAN02 LITAR]]
*[[ECAN02 LITAR]]
*[[ECAN02 EAN]]
*[[ECAN02 EAN]]
*[[ECAN02 HS]]
*[[ECAN02 HS]]
*[[ECAN02 RoHS]]
*[[ECAN02 ECCN]]


==FAQ==
==FAQ==
Line 196: Line 199:
|}
|}


==External Links==
==Additional information==
 
[https://teltonika-gps.com/products/trackers/can-obd-data/ecan02 ECAN02 Teltonika]
[https://teltonika-gps.com/products/trackers/can-obd-data/ecan02 ECAN02 Teltonika]
{{{EOL|For EOL policy please refer to link [https://teltonika-gps.com/support/eol-products here].}}}


[[Category:CAN Trackers & Adapters]]
[[Category:CAN Trackers & Adapters]]

Revision as of 15:37, 23 October 2024

Main Page > CAN Trackers & Adapters > ECAN02

ECAN02 is contactless adapter used to read vehicle CAN Bus data. ECAN02 adapter should be used in combination with:

It reads can-bus data through the isolation of wires without damaging them and forwards signals to the tracking device.

Features

  • ECAN02 collects vehicle data from CAN bus without damaging the wires
  • Powered from an on-board power source
  • Reads the signals through the isolation of CAN bus wires
  • Easy to install and operate

YouTube

Technical features

PARAMETER VALUE
Minimum Typical Typical Maximum Unit
Supply Voltage
Supply Voltage (Recommended Operating Conditions) +10 +12 +24 +30 V
Current Consumption
Working Mode 4.21 mA
Sleep Mode 1.47 mA
Operating Temperature
Operating Temperature -40 +85 °C
Protection
Internal resettable fuse (max 33 V) 750 mA
  • Dimensions 39 x 12 x 19 mm
  • CAN-BUS speeds up to 1000 kb/s
  • ECAN02 is manufactured and meant to be used only with Teltonika devices. Cannot guarantee expected quality with 3rd party devices
  • Fuse is protecting devices from high current peaks. If the voltage exceeds 33V (i.e. 35V) then protection diode stabilizes device voltage to 33V and the current value will increase accordingly.

Pinout

PIN NUMBER PIN NAME

DESCRIPTION

1 CAN L (Blue) Connect to CAN L input of CAN BUS converter
2 CAN H (White/Blue) Connect to CAN H input of CAN BUS converter
3 VCC (RED) Power supply (10-30) V DC (+)
4 GND (-) (Black) Ground wire (10-30) V DC (-)

Wiring scheme

Setup ECAN02

  1. Gently open the ECAN02 cover using a plastic pry tool from both sides.
  2. Remove backing material on double-sided adhesive tape.
  3. Insert CAN wires. Please make sure that the correct slots are used (CAN High/CAN Low).
  4. Close the device.
  5. Device is ready-to-use.


Certification & Approvals

Memberships

Certification & Approvals

Nomenclature, classification codes

FAQ

Product Change Notifications

ECAN02 Product Change Notifications

Promotional Material

ECAN02 Promotional Material

Downloads

Manuals & Documentation

ECAN02 Datasheet (EN) (Updated on: 2023-06-21)
ECAN02 flyer (Updated on: 2023-06-22)
ECAN01 vs ECAN02 flyer (Updated on: 2023-06-22)

Additional information

ECAN02 Teltonika

For EOL policy please refer to link here.