Difference between revisions of "FM6320 SMS/GPRS command list"
From Wiki Knowledge Base | Teltonika GPS
(Created page with "{{Template:FMB FW development notice}} All commands are case sensitive. When user tries to send SMS/GPRS message to {{{model|FMB640}}} that operates in Deep Sleep mode, it ca...") |
|||
(One intermediate revision by one other user not shown) | |||
Line 1: | Line 1: | ||
− | {{Template: | + | {{Template:FMB FW development notice}} |
+ | All commands are case sensitive. When user tries to send SMS/GPRS message to {{{model|FMB640}}} that operates in Deep Sleep mode, it cannot arrive to {{{model|FMB640}}} device because the GSM/GPRS module is disabled most of the time. {{{model|FMB640}}} will receive the SMS/GPRS message when it exits Deep Sleep mode.<br/>If {{{model|FMB640}}} is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device. | ||
− | {{{sect_can|{{Template:FMB640 CAN SMS/GRPS commands | + | |
− | + | ==Common commands== | |
+ | |||
+ | {| class="wikitable" | ||
+ | |+ | ||
+ | ! style="width: 150px; background: black; color: white;" | Command | ||
+ | ! style="width: 500px; background: black; color: white;" | Description | ||
+ | ! style="width: 50px; background: black; color: white;" | Response | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB getstatus|getstatus]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Modem Status information. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB getweektime|getweektime]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Current device time, Day of Week and amount of minutes passed since start of week. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB getops|getops]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | List of currently used and available GSM operators. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB getcfgtime|getcfgtime]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Date and Time of last successful configuration | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: center;" | ''[[FMB readops|readops#]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Emergency gsm operator readout from active profile<br/> | ||
+ | # - 1,2,3<br/> | ||
+ | 1 – operators [1-20] <br/> | ||
+ | 2 – operators [21-40] <br/> | ||
+ | 3 – operators [41-50] | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB getnmeainfo|getnmeainfo]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Nmea error debug sms. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB getcfgtime|getcfgtime]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Date and Time of last successful configuration. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB getgps|getgps]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Current GPS data and time. | ||
+ | | style="text-align: left; vertical-align: top;" | No | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB loadprofile|loadprofile#]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Load specified profile into RAM Engine Profile. # - number of profile to load. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB cpureset|cpureset]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Reset CPU. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB resetallprof|resetallprof]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Reset all FLASH profiles to default profile. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB deleterecords|deleterecords]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Delete all records saved on FLASH. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB getver|getver]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Device / Modem / Code version information. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB getinfo|getinfo]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Device runtime system information. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB deleterecords|deleterecords]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Delete all records saved on FLASH. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB getio|getio]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Readout digital inputs and outputs, analog inputs. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB readio|readio #]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Readout input value according entered ID, # - ID value. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB getgnss|getgnss]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Current GNSS information. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB sn|sn x [x=0;1]]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Enable/disable static navigation. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: center;" | {{{cmd_setdigout|''[[FMB setdigout|setdigout]] XXXX Y1 Y2 Y3 Y4''}}} | ||
+ | | style="text-align: left; vertical-align: top;" | Set digital output.{{{txt_setdigout|<br/>1. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT1.<br/>2. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT2.<br/>3. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT3.<br/>4. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT4.<br/>Y1 – timeout value for DOUT1 if needed (in seconds).<br/>Y2 – timeout value for DOUT2 if needed (in seconds).<br/>Y3 – timeout value for DOUT3 if needed (in seconds).<br/>Y4 – timeout value for DOUT4 if needed (in seconds).}}} | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[getparam|getparam]] #'' | ||
+ | | style="text-align: left; vertical-align: top;" | Readout parameter value according entered ID. | ||
+ | # - ID value. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: center;" | ''[[setparam|setparam]] # #'' | ||
+ | | style="text-align: left; vertical-align: top;" | Set parameter value according entered ID and Value. <br /> 1.# - ID value. <br /> 2.# - New Parameter Value. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: center;" | ''[[FMB flush|flush]] #,#,#,#,#,#,#'' | ||
+ | | style="text-align: left; vertical-align: top;" | Redirects device to other server.<br/> | ||
+ | 1.# - IMEI.<br/> | ||
+ | 2.# - APN.<br/> | ||
+ | 3.# - LOGIN.<br/> | ||
+ | 4.# - PASS.<br/> | ||
+ | 5.# - IP.<br/> | ||
+ | 6.# - PORT.<br/> | ||
+ | 7.# - MODE (0-TCP/1-UDP). | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB banlist|banlist]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Banlist information. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB crashlog|crashlog]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Crash log information. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB delete_all_sms|delete_all_sms]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Delete all read SMS. | ||
+ | | style="text-align: left; vertical-align: top;" | No | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB delete_all_sms|delete_all_sms]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Delete all read SMS. | ||
+ | | style="text-align: left; vertical-align: top;" | No | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB odinfo|odinfo]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Odometer Debug info. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB prof2backup|prof2backup]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Saves configuration to backup. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB backup2prof|backup2prof]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Recovers saved profile. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | ! style="text-align: left; vertical-align: top;" | ''[[FMB backupinfo|backupinfo]]'' | ||
+ | | style="text-align: left; vertical-align: top;" | Backup information. | ||
+ | | style="text-align: left; vertical-align: top;" | Yes | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | {{{sect_can|{{Template:FMB640 CAN SMS/GRPS commands}}}}} |
Revision as of 15:07, 21 September 2018
Main Page > EOL Products > FM6320 > FM6320 Manual > FM6320 SMS/GPRS command list
All commands are case sensitive. When user tries to send SMS/GPRS message to FMB640 that operates in Deep Sleep mode, it cannot arrive to FMB640 device because the GSM/GPRS module is disabled most of the time. FMB640 will receive the SMS/GPRS message when it exits Deep Sleep mode.
If FMB640 is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.
Common commands
Command | Description | Response |
---|---|---|
getstatus | Modem Status information. | Yes |
getweektime | Current device time, Day of Week and amount of minutes passed since start of week. | Yes |
getops | List of currently used and available GSM operators. | Yes |
getcfgtime | Date and Time of last successful configuration | Yes |
readops# | Emergency gsm operator readout from active profile
1 – operators [1-20] |
Yes |
getnmeainfo | Nmea error debug sms. | Yes |
getcfgtime | Date and Time of last successful configuration. | Yes |
getgps | Current GPS data and time. | No |
loadprofile# | Load specified profile into RAM Engine Profile. # - number of profile to load. | Yes |
cpureset | Reset CPU. | Yes |
resetallprof | Reset all FLASH profiles to default profile. | Yes |
deleterecords | Delete all records saved on FLASH. | Yes |
getver | Device / Modem / Code version information. | Yes |
getinfo | Device runtime system information. | Yes |
deleterecords | Delete all records saved on FLASH. | Yes |
getio | Readout digital inputs and outputs, analog inputs. | Yes |
readio # | Readout input value according entered ID, # - ID value. | Yes |
getgnss | Current GNSS information. | Yes |
sn x [x=0;1] | Enable/disable static navigation. | Yes |
setdigout XXXX Y1 Y2 Y3 Y4 | Set digital output. 1. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT1. 2. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT2. 3. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT3. 4. # – 0 or 1 (0 - OFF or 1 – ON) for DOUT4. Y1 – timeout value for DOUT1 if needed (in seconds). Y2 – timeout value for DOUT2 if needed (in seconds). Y3 – timeout value for DOUT3 if needed (in seconds). Y4 – timeout value for DOUT4 if needed (in seconds). |
Yes |
getparam # | Readout parameter value according entered ID.
|
Yes |
setparam # # | Set parameter value according entered ID and Value. 1.# - ID value. 2.# - New Parameter Value. |
Yes |
flush #,#,#,#,#,#,# | Redirects device to other server. 1.# - IMEI. |
Yes |
banlist | Banlist information. | Yes |
crashlog | Crash log information. | Yes |
delete_all_sms | Delete all read SMS. | No |
delete_all_sms | Delete all read SMS. | No |
odinfo | Odometer Debug info. | Yes |
prof2backup | Saves configuration to backup. | Yes |
backup2prof | Recovers saved profile. | Yes |
backupinfo | Backup information. | Yes |
Command | Description | Response |
---|---|---|
lvcansetprog # | Set program number to LV-CAN200/ ALL-CAN300 that is connected to FMx640. # - three digit number that identity vehicle | Yes |
lvcansimpletacho # | Add or remove simpletacho start byte. # - 0 or 1 (0 – don’t add start byte, 1 – add start byte) | No |
lvcangetprog | Get program number from LV-CAN200/ ALL-CAN300 that is connected to FMx640 | Yes |
lvcangetinfo | Get information about connected LV-CAN200/ALL-CAN300 | Yes |
lvcanclear # | Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values. # - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted)) | Yes |