Difference between revisions of "FMB630 General description"
From Wiki Knowledge Base | Teltonika GPS
(One intermediate revision by one other user not shown) | |||
Line 16: | Line 16: | ||
{{Template:FMB1 Supply voltage 10 30}} | {{Template:FMB1 Supply voltage 10 30}} | ||
− | {{Template:FMB6 Technical features| | + | {{Template:FMB6 Technical features|grps=120|nominal=65|gnss_sleep=28|deep_sleep=7|onl_deep_sleep=100|battery=55|operating_min=-25|operating_max=+55|storage_min=-40|storage_max=+70|humidity_min=5|humidity_max=95|}} |
==Technical information about internal battery== | ==Technical information about internal battery== |
Revision as of 13:55, 17 June 2019
Main Page > EOL Products > FMB630 > FMB630 Manual > FMB630 General descriptionFMB630 is a tracking terminal with GNSS and GSM connectivity, which is able to collect device coordinates and transfer them via GSM network to a server. This device is perfectly suitable for applications, which require the location acquirement of remote objects.
Package contents
Usually the FMB630 device sample is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation. The package contains:
- FMB630 device;
- 4 screws for assembling device
- GPS/GLONASS antenna
- GSM antenna
- USB cable
- Port 1/2 cable
- Port 3 cable
- Ni-MH Rechargeable battery, 8.4V, 550 mA.
- Input and output power supply cable with 2x10 connection pins.
Basic characteristics
GSM/GPRS/ features:
- Quad-band 900/1800 MHz; 850/1900 MHz
- GPRS Multi-Slot Class 12(up to 240 kbps)
- GPRS Mobile Station Class B
- SMS (text/data)
Bluetooth:
- Bluetooth specification V3.0
- Bluetooth transceiver fully compliant with Bluetooth specification V3.0 for external peripherals:
- Voice calls over Bluetooth
- Configuration via Bluetooth
GNSS:
- Tracking: 33/ 99 acquisition channels
- -165 dBM sensitivity
- Hot start <1s
- Warm Start < 25s
- Cold start < 35s
- NMEA-183 protocol
- GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS
- Accuracy < 3m
Hardware features:
- STM32 processor;
- 1MB internal Flash memory;
- External Micro SD card slot;
- Built-in accelerometer;
- Built-in Bluetooth 3.0;
- Internal backup battery included;
Interface:
- Power supply: 10 ÷ 30V;
- USB port;
- 4 digital inputs;
- 3 analog inputs;
- 4 open collector digital outputs;
- 1Wire® interface;
- LEDs indicating device status;
- K-Line interface for online Tachograph Vehicle Data transfer;
- 2xRS232 port;
- RS485 port;
- J1708 interface;
- CAN messages 2.0 A, B Active support. Speed up to 1 Mbit/s;
- Roaming enabling/disabling;
- Offline working mode;
- Records importing using USB/microSD card;
- Remote logs reading via SMS/GPRS;
Description | Voltage | Duration |
---|---|---|
Normal operation |
+10 ... +30 V |
Unlimited |
Protection turns on, device turns off | 34 V | Unlimited |
Maximum voltage | < 70 V | Unlimited |
Maximum voltage impulse | 90 V | 5 ms |
Technical features
Part name | Physical specification |
---|---|
Navigation indication | LED |
Modem indication | LED |
Socket | Soldered inner socket |
USB | Mini USB socket |
GNSS | External GNSS antenna |
GSM | External GSM antenna |
Technical details | |
---|---|
2 W max. Current consumption at 12 V |
GPRS: average avg mA rms Nominal: average 65 rms GNSS sleep: average 28 mA Deep Sleep: average 7 mA Online Deep Sleep: average 100 mA |
2 W max. Current consumption at 24 V |
GPRS: average 35 mA Nominal: average 20 mA GNSS sleep: average 12,5 mA Deep Sleep: average 3,8 mA Online Deep Sleep: average 1,3 mA |
Battery charge current | Average 55 mA |
Operating temperature (without battery) | -40..+85 |
Storage temperature (without battery) | -40..+85 |
Storage relative humidity | 5..95% (no condensation) |
Device + case + battery weight | 197 g |
Dimension drawing:
Technical information about internal battery
Internal back-up battery | Battery voltage (V) | Nominal Capacity (mAh) | Charging temperature (°C) |
---|---|---|---|
Ni-MH rechargeable battery | 8.4~10.0 | 550 | 0 – 45 |
Batteries are covered by 6 month warranty support.
Electrical characteristics
Characteristic description | Value | |||
---|---|---|---|---|
Min. | Typ. | Max. | Unit | |
Supply Voltage: | ||||
Supply Voltage (Recommended Operating Conditions) |
+10 | +30 | V | |
Digital Output (Open Drain grade): | ||||
Drain current (Digital Output OFF) | 120 | µA | ||
Drain current (Digital Output ON, Recommended Operating Conditions) |
0.5 | A | ||
Static Drain-Source resistance (Digital Output ON) |
400 | 300 | mΩ | |
Digital Input: | ||||
Input resistance (DIN1) | 15 | kΩ | ||
Input resistance (DIN2) | 15 | kΩ | ||
Input resistance (DIN3) | 15 | kΩ | ||
Input voltage (Recommended Operating Conditions) |
0 | Supply voltage | V | |
Input Voltage threshold (DIN1) | 7.5 | V | ||
Input Voltage threshold (DIN2, DIN3, DIN4) | 2.5 | V | ||
Analog Input: | ||||
Input voltage (Recommended Operating Conditions), Range 1 |
0 | +10 | V | |
Input resistance, Range 1 | 120 | kΩ | ||
Input voltage (Recommended Operating Conditions), Range 2 |
0 | +30 | V | |
Input resistance, Range 2 | 147 | kΩ | ||
Output Supply Voltage 1-Wire: | ||||
Supply voltage | +4.5 | +4.7 | V | |
Output inner resistance | 7 | Ω | ||
Output current (Uout > 3.0 V) | 30 | mA | ||
Short circuit current (Uout = 0) | 75 | mA | ||
CAN Interface: | ||||
Internal terminal resistors CAN bus | 120 | Ω | ||
Differential input resistance | 19 | 30 | 52 | kΩ |
Recessive output voltage | 2 | 2.5 | 3 | V |
Differential input resistance | 0.5 | 0.7 | 0.9 | V |
Common mode input voltage | -30 | 30 | V | |
Power supply current (Hardware version with internal battery): | ||||
Deep Sleep, average, Icc.ds | 2.5 | 4 | mA | |
Sleep, average, Icc.ds, Vcc=10V | 45 | mA | ||
Sleep, average, Icc.ds, Vcc=30V | 25 | mA | ||
Ucc=12.6V, all modules fully working, internal battery is charging, Icc1 | 350 | mA | ||
Ucc=12.6V, all modules fully working, internal battery is charging, Icc2 | 300 | mA | ||
Ucc=25.2V, all modules fully working, internal battery is charging, Icc3 | 195 | mA | ||
Ucc=25.2V, all modules fully working, internal battery is charging, Icc4 | 140 | mA | ||
RS232/RS485 Input Voltage: | ||||
RS485 input voltage range on A or B pin (common-mode voltage) | -7 | +12 | V | |
RS232 input voltage range (common-mode voltage) | -15 | +15 | V |
![]() |
Analog Input error margin can increase if temperature varies. |
Absolute maximum ratings
Characteristic description | Value | |||
---|---|---|---|---|
Min. | Typ. | Max. | Unit | |
Supply Voltage (Absolute Maximum Ratings) |
-32 | +32 | V | |
Drain-Source clamp threshold voltage (Absolute Maximum Ratings), (Idrain = 2 mA) |
+36 | V | ||
Digital Input Voltage (Absolute Maximum Ratings) |
-32 | +32 | V | |
Analog Input Voltage (Absolute Maximum Ratings) |
-32 | +32 | V | |
RS232 Input Voltage (Absolute Maximum Ratings) |
-25 | +25 | V |