FM36M1 General description

From Wiki Knowledge Base | Teltonika GPS
Revision as of 13:52, 30 April 2019 by Mantas.sestokas (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > EOL Products > FM36M1 > FM36M1 Manual > FM36M1 General description

FM36M1 is GNSS, LTE CAT M1, NB IoT terminal with backup battery for SPECIAL applications. FM36M1is designed for light vehicles tracking but also suitable for advanced applications like logistics, delivery services, utility transport and more. It is excellent for refrigerated transport, because this terminal have extended input/output set and 1-wire interface for temperature monitoring. With Teltonika CAN adapters, FM36M1 can be even used in agriculture or construction & mining. Moreover FM36M1 supports LTE CAT M1 and NB IoT, with additional GSM backwards compatibility, which makes this device usable with newest, cost efficient and most popular technologies. FM36M1 also has a USB port for device status log output and configuration.

Bw nb.png Monitorable basic vehicle parameters depend on vehicle mark and model.

Package contents

The FM36M1 device is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation. The package contains:

  • FM36M1 device;
  • Input and output power supply cable with a 2x6 connection pins;
  • USB cable;
  • Li-Po battery 3.7V, 170mAh.

Basic characteristics

GSM/GPRS/4G LTE CAT.M1 features:

  • FDD-LTE:
    • B1/ B2/ B3/ B4/ B5/ B8/ B12/ B13/ B18/B19/ B20/ B26/ B28
  • TDD-LTE:
    • B39 (for Cat.M1 only)
  • GSM/GPRS bands:
    • 850/900/1800/1900MHz
    • GPRS and EDGE class 12
    • SMS (text, data)


Hardware features:

  • Cortex®-M3 processor;
  • 8 Mbit internal Flash memory;
  • Built-in accelerometer sensor.


Interface features:

  • Power supply: 10 ÷ 30V;
  • 2 digital inputs;
  • 2 analog/digital input;
  • 2 open collector Digital output;
  • 1 Wire interface:
    • Temperature sensor
    • iButton
  • Internal backup battery;
  • 2 Status LEDs:
    • Navigate
    • Status
  • Internal USB port;
  • Internal GSM antenna;
  • Internal GNSS antenna;
  • INPUT 5 and INPUT 6, for LV-CAN200 and ALLCAN300 adapter connection;


GNSS features:

  • 33 channel GNSS receiver
  • -165 dBm sensitivity
  • Hot start <1s
  • Warm Start < 25s
  • Cold start < 35s
  • NMEA-183 protocol
  • GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS
  • Accuracy < 3m


Special features:

  • Any element event triggers (external sensor, input, speed, temperature, etc.);
  • Highly configurable data acquisition and sending;
  • Multiple Geo-fence areas;
  • Sleep mode;
  • Deep sleep mode;
  • Configurable scenarios available;
  • Real-time process monitoring;
  • Authorized number list for remote access;
  • Firmware update over GPRS or USB port;
  • Configuration update over GPRS, SMS or USB port;
  • TCP/IP or UDP/IP protocol support;
  • Up to 3854 records storing;
  • Radio frequency jamming detection.
  • Records exporting using USB;
  • Offline working mode;


Technical information about internal battery


Internal back-up battery Battery voltage (V) Nominal Capacity (mAh) Power (Wh) Charge temperature (°C) Discharge temperature (°C) Storage temperature (°C)
Li-ion rechargeable battery 3.75~3.90 170 0.64 – 0.66 0 to +45 -20 to +60 -20 to +45 for 1 month
-20 to +35 for 6 months

Batteries are covered by 6 month warranty support.

Bw nb.png CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Bw disposal.png Battery should not be disposed of into general household waste.
Bring damaged or worn-out batteries to your local recycling center or dispose them into a battery recycle bin commonly found in supermarkets.

Technical features


Part name Physical specification
System LED LED
Navigation LED LED
Socket 2x6 Tyco Micro MATE-N-LOK™ 4-794628-0 or similar
USB Micro USB socket


Technical details
2 W max.
Energy consumption at 12 V (Power supply 10...30 V DC)
GPRS: average 150 mA rms
Nominal: average 50 mA rms
GPS sleep: average 18 mA
Deep Sleep: average 5 mA
Battery charge current max. 100 mA
Rated current max. 250 mA
Operating temperature (without battery) -40..+85 °C
Storage temperature (without battery) -40..+85 °C
Storage relative humidity 5..95% (no condensation)
Internal fuse 3A, 125V


Dimension drawing:

FM36 Dimension.png

Electrical characteristics

Characteristic description Value
Min. Typ. Max. Unit
Supply Voltage:
Supply Voltage (Recommended Operating Conditions) 10 30 V
Drain current (Digital Output1 OFF) 241.69 µA
Drain current (Digital Output1 ON) 0.1 0.5 A
Drain current (Digital Output2 OFF) 240.26 µA
Drain current (Digital Output2 ON) 0.1 0.5 A
Static Drain-Source resistance (Digital Output ON) 300
Digital Input:
Input resistance (DIN1) 15
Input resistance (DIN2, AIN2) 20
Input resistance (AIN1) 120
Input voltage (Recommended Operating Conditions) 0 Supply voltage V
Input Voltage threshold (DIN1) 7.5 V
Input Voltage threshold (DIN2) 2.5 V
Input Voltage threshold (AIN1, AIN2) 3.5 V
Analog Input:
Input voltage (Recommended Operating Conditions), Range 1 0 10 V
Input resistance, Range 1 120
Measurement error 0.47 %
Additional error ±17.3 mV
Input Voltage (Recommended Operating Conditions), Range 2 0 30 V
Input resistance, Range 2 150
Measurement error 1.01 %
Additional error ±139 0 mV
Bw nb.png Analog Input error margin can increase if temperature varies.