FMB640 firmware errata

From Wiki Knowledge Base | Teltonika GPS
Main Page > EOL Products > FMB640 > FMB640 firmware errata

Introduction

We are always improving our devices performance, stability and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.
This document describes FMB640 devices firmware improvements, changes, new features implementations as well as current firmware release version.

Firmware versioning

  • Structure
 FM.VER.[XX].[YY].[ZZ]
  • Syntax description
    • XX – client number. Value range: 00 – Teltonika, 02..99 – Specific clients
    • YY – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.
    • ZZ – minor changes like small fixes, improvements and new minor features addition.


Firmware versions

FIRMWARE VERSION RELEASE DATE CHANGES
00.03.79 2020.08.10
  • Tachograph driver data handling improvements
  • Tacho download improvements
  • Record send stability improved
  • AutoCAN, ManualCAN improvements
  • Tachograph data reading improvements
  • TSM232 stability improvements.
  • Added TSM232 check feature in Configurator Status>Maintenance Tab.
  • Added Geofence Over speeding DOUT control in every geozone.
  • Added Dout Control to every geozone.
  • TPMS funcionality improvements
  • Added Custom scenario event onExit feature.
  • Added DOUT control in progress event reset.
  • Added FMS Tell status IOs
  • Garmin improvements
  • LVCAN,ALLCAN, CAN-CONTROL reading improvements
  • DSleep logic improvements
  • COM modes stability improvements
  • TCP,UDP packets handling improve
  • Internal improvements for manufacture
00.03.65
2020.01.24
  • UDP data sending improvements
  • Battery charge mode parameter added
  • GPS FIX time after sleep improved
  • Wake up from sleep modes improved
  • FrontPanel DDD files sending stability improvements
  • K-Line midnight record saving logic changed
  • ManualCAN improvements
  • Tachograph data reading improvements
  • FMC640, FMM640 support added
  • Movement source parameter added
  • IO elements data sending mode added
  • GALILEO and BEIDOU selection for GNSS mode added
  • Device and FOTAWEB communication stability improvements
  • Carrier freezer new parameters added
  • LVCAN, ALLCAN communication improved
  • CAN-CONTROL with DTC reading added
  • LLS fuel sensor reading stability improved
  • Immobilizer improvements
  • iButton read notification improvements
  • Accelerometer autocalibration logic improved
  • Continental TPMS improvements
  • New type of zone for Manual geofence added
00.03.50
2019.06.19
  • DTCO VDO 4.0 tachograph support added
  • Tachograph data sending improvements
  • Records saving to SD card improvements
  • Ping mode improvements
  • GPS sleep mode improvements
  • DOUT control improvements
  • Configuration stability improvements
00.03.45
2019.04.25
  • Carrier freezer support added
  • Tachograph data sending improvements
  • LVCAN setting program nr. via configurator added
  • Odometer value improvements
  • Accelerometer improvements added
  • Additional FMS parameters added
  • CAN CONTROL functionality added
  • FOTA Web functionality improvements
  • DOUT control improvements
  • SMS/GPRS commands improvements
  • iButton functionality improvements
  • FrontPanel DDD files reading support added
  • GPRS stability improvements
  • NTP improvements
  • Deep sleep consumption improvements
  • Alternative DDD card download added
00.03.21
2019.01.24
  • K-Line improvements
  • Sleep mode improvements
  • Data sending improvements
  • Custom Scenarios functionality added
  • Additional MCAN parameters added
  • Static Navigation deactivation source added
  • New function for iButton notifications scenario added
  • K-Line record merged with periodic record
  • Configurator changes. FMS I/O parameter "Distance" moved to Tachograph Data tab
  • Tachograph communication improvements
00.03.14
2019.01.04
  • FMS IO AdBlue parameter added
  • LVCAN stability improvements
  • Manual CAN2 list implemented
  • GPRS Limits added
  • DOUT control via call functionality added
  • Autogeofence deactivate by Engine RPM added
  • Tacho download improvements
00.03.08 2018.12.06
  • FOTA Web stability improvements
  • Data sending improvements
  • Tacho download improvements
  • Dual server functionality improvements
  • IO elements configuration improvements
00.03.04 2018.11.27
  • MobilEye support added
  • 100 geozones support added
  • MCAN2 support added
  • DOUT control improvements
  • Battery charge improvements
  • Records saving and sending improvements
  • SMS commands improvements
  • Immobilizer scenario improvements
  • Crach detection improvements
  • Status window implemented
  • Tachocheck SMS command improvements
  • Dual server functionality improvements
  • Overspeeding scenario improvements
  • Device stability improvements
  • Tacho download improvements
00.01.05 2018.08.06
  • CAN adapter (LV-CAN200/ALL-CAN300) improvements
  • ADC (Analog to Digital Converter) accuracy improvement
  • J1708 CAN Fuel Level/Consumption parameters added
  • Quectell Hardware support added
  • Zbit flash added
  • USB connection improvements
  • "On Delta Change" operand (event generating) added.
  • Codec 12 parsing improvements
00.00.13 2018.05.10
  • SMS sending for panic records added to code.
  • SMS events improvements.
  • Tachograph auto connect improved.
  • Fota Web support added
  • Deep Sleep Improvements
  • USB improvements