Difference between revisions of "FMA202 GSM settings, GPRS part"

From Wiki Knowledge Base | Teltonika GPS
(Created page with "{{Template:FMA2_GSM_settings,_GPRS_part|model=FMA202}}")
Line 1: Line 1:
 
{{Template:FMA2_GSM_settings,_GPRS_part|model=FMA202}}
 
{{Template:FMA2_GSM_settings,_GPRS_part|model=FMA202}}
[[Category:FMA202 Configuration]]
 

Revision as of 08:34, 6 September 2018

Main Page > EOL Products > FMA202 > FMA202 Configuration > FMA202 GSM settings, GPRS part

GPRS defines main parameters for FMA202: GSM operator APN and GPRS username and password (optional – depending on the operator), destination server IP and port, and allows to set protocol used for data transfers – TCP or UDP.
Some operators use specific authentication for GPRS session – CHAP or PAP. If any of these is used, APN should be entered as ‘chap:<APN>’ or ‘pap:<APN>’. I.e. if the operator is using APN ‘internet’ with CHAP authentication, it should be entered as ‘chap:internet’. Information about APN and authentication type should be provided by your GSM operator.

FMA2 GPRS configuration.png