SIMPLE-CAN

SIMPLE-CAN is contactless adapter used to read vehicle CAN Bus data. SIMPLE-CAN adapter should be used in combination with:

• LV-CAN200
• ALL-CAN300
• FMB140
• FMB640, FMB630, FM6320, FM6300 to read J1939 CAN data.

It reads can-bus data through the isolation of wires without damaging them and forwards signals to the tracking device.

Features

• SIMPLE-CAN collects vehicle data from CAN bus without damaging the wires
• Powered from an on-board power source
• Reads the signals through the isolation of CAN bus wires
• Easy to install and operate

Technical features

PARAMETER	VALUE
	Minimum	Typical	Typical	Maximum	Unit
Supply Voltage
Supply Voltage (Recommended Operating Conditions)	+9	+12	+24	+63,5	V
Current Consumption
Working Mode		8,3	4,3		mA
Sleep Mode		1,6	0,91		mA
Operating Temperature
Operating Temperature	-40			+85	°C

• Dimensions 41,0 x 42,1 x 14,5 mm
• Weight 23,6 g
• CAN-BUS speeds from 33,33 to 500 kb/s
• Automatically sets CAN Low, CAN High polarity
• Automatically adjusts signal level and speed

Nomenclature, classification codes

• SIMPLE-CAN LITAR

FAQ

• How to install SIMPLE-CAN with LV-CAN200/ALL-CAN300 using:
  • FMB110
  • FMB120
  • FMB122
  • FMB125
  • FMB110
  • FMA120
  • FMB630
  • FMB640
  • FM6300
  • FM6320
  • FM36M1
  • FM3622
  • FM3612

YouTube

Teltonika CAN adapters Part 1: Introduction
Teltonika CAN adapters Part 2: Installation

Additional information

https://teltonika-gps.com/product/simple-can/

For EOL policy please refer to link here.