Difference between revisions of "ECAN01"
From Wiki Knowledge Base | Teltonika GPS
| Line 67: | Line 67: | ||
*Dimensions 39.8 x 18 x 16.7 mm | *Dimensions 39.8 x 18 x 16.7 mm | ||
| − | |||
*CAN-BUS speeds up to 1000 kb/s | *CAN-BUS speeds up to 1000 kb/s | ||
| Line 89: | Line 88: | ||
*[[FM36M1 CAN adapters#SIMPLE-CAN - contactless CAN-BUS reader|FM36M1]] | *[[FM36M1 CAN adapters#SIMPLE-CAN - contactless CAN-BUS reader|FM36M1]] | ||
*[[FM3622 CAN adapters#SIMPLE-CAN - contactless CAN-BUS reader|FM3622]] | *[[FM3622 CAN adapters#SIMPLE-CAN - contactless CAN-BUS reader|FM3622]] | ||
| − | *[[FM3612 CAN adapters#SIMPLE-CAN - contactless CAN-BUS reader|FM3612]] | + | *[[FM3612 CAN adapters#SIMPLE-CAN - contactless CAN-BUS reader|FM3612]] |
Revision as of 15:28, 3 January 2020
Main Page > CAN Trackers & Adapters > ECAN01
ECAN01 (Easy-CAN) is contactless adapter used to read vehicle CAN Bus data. ECAN01 (Easy-CAN) adapter should be used in combination with:
It reads can bus data through the isolation of wires without damaging them and forwards signals to tracking device.
Features
- Easy-CAN collects vehicle data from CAN bus without damaging the wires
- Powered from on-board power source
- Reads the signals through the isolation of CAN bus wires
- Easy to install and operate
Technical features
| PARAMETER | VALUE | |||
|---|---|---|---|---|
| Minimum | Typical | Maximum | Unit | |
| Supply Voltage | ||||
| Supply Voltage (Recommended Operating Conditions) | +10 | +12 | +30 | V |
| Current Consumption | ||||
| Working Mode | 6.9 | mA | ||
| Sleep Mode | 1.2 | mA | ||
| Operating Temperature | ||||
| Operating Temperature | -25 | +85 | °C | |
| Protection | 750 | mA | ||
- Dimensions 39.8 x 18 x 16.7 mm
- CAN-BUS speeds up to 1000 kb/s
Nomenclature, classification codes
FAQ
- How to install SIMPLE-CAN with LV-CAN200/ALL-CAN300 using:
- FMB110
- FMB120
- FMB122
- FMB125
- FMB110
- FMA120
- FMB630
- FMB640
- FM6300
- FM6320
- FM36M1
- FM3622
- FM3612
YouTube
Teltonika CAN adapters Part 1: Introduction
Teltonika CAN adapters Part 2: Installation
