Difference between revisions of "Iridium Edge"

From Wiki Knowledge Base | Teltonika GPS
(14 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
[[File:Irr edge.png|alt=|right|400x400px]]
 
[[File:Irr edge.png|alt=|right|400x400px]]
  
−
'''Iridium Edge''' features an all-in-one SBD module and antenna, with power supply. The plug-and-play satellite IoT terminal can be easily paired with FMB devices in order to expand their functionality to no '''GSM coverage zones'''. Current Iridium implementation offers ability to generate and send SBD records after set period after the GSM signal is lost. This ensures constant connectivity for the clients as Iridium network is available globally.
+
__TOC__
  
−
*[[Iridium Edge First Start]]
+
Iridium Edge features an all-in-one SBD module and antenna, with power supply. The plug-and-play satellite IoT terminal can be easily paired with FMB devices in order to expand their functionality to no GSM coverage zones. Current Iridium implementation offers ability to generate and send SBD records after set period after the GSM signal is lost. This ensures constant connectivity for the clients as Iridium network is available globally.
−
*[[Iridium Edge Configuration]]
 
−
*[[Iridium Edge Communication Protocol]]
 
−
*[[Iridium Edge Firmware errata]]
 
−
*[[Iridium Edge FAQ]]
 
  
−
==Downloads==
+
==First Start==
−
'''Manual & Documentation'''<br>
 
  
−
[[File:pdf_icon.png|32px|link=]]
+
===Wiring diagram===
−
[[Media: 548789 Iridium Edge V1.1 (2).pdf |Iridium Edge Datasheet (EN)]]
 
−
<small>(Updated on: 2023-03-29)</small>
 
  
−
[[File:pdf_icon.png|32px|link=]]
+
 
−
[[Media: Iridium Connected Telematics Solution.pdf |Iridium Edge Flyer (EN)]]
+
'''FMX125''' device connection to Irridium edge via FMX125 devices.
−
<small>(Updated on: 2023-01-30)</small>
+
 
 +
[[File:Irridium new.jpg|center|850px]]
 +
 
 +
'''FMX640''' device connection to Irridium edge via FMX640 devices.
 +
 
 +
[[File:Iridium connwect.jpeg|center|750px]]
 +
 
 +
===Installation===
 +
 
 +
'''[[Media:IRDM Iridium Edge Quick Installation Guide.pdf| Iridium Edge Quick Installation Guide]] document''' will show how to install Iridium Edge into the vehicle and prepare the device for configuration with our FMX640 and FMX125 family devices.
 +
 
 +
'''Please note: it is essential to follow all the instructions for effective installation, if any further questions arise, please contact your sales representative for more information.'''
 +
 
 +
===Key Features===
 +
* Hardware-Ready Device for Simple, Low Risk Integration
 +
* Satellite Add-On for Truly Global Coverage
 +
* Robust Power Supply for Industrial Installations
 +
* Certified in Key Geographic Markets
 +
* 180° Line of Sight for Compromised, Partially Blocked Locations
 +
 
 +
===Network characteristics===
 +
* Frequency: 1616 – 1626.5 MHz
 +
* Message Size: 14 Bytes (Receive), 14 Bytes (Transmit)
 +
* SBD Transceiver: Iridium 9602N
 +
* Antenna: Integrated Iridium® Certified Antenna
 +
 
 +
===Environmental characteristics===
 +
* Operating/Storage Temperature Range: -40C to 85C
 +
* Vibration: SAE J1455, Section 4.10
 +
 
 +
===Mechanical characteristics===
 +
* Dimensions (LxWxH): 130 x 80 x 30mm
 +
* Ingress Protection: IP 67
 +
* Side & Bottom Cable Exits
 +
* Connector: M12-8 pin male, terminated on 20cm
 +
* Pigtail Cable
 +
* Installation Options: Pole, Screw, Tape
 +
 
 +
===Electrical characteristics===
 +
* Power Supply: ( 9-32V), SAE J1455 Load Dump Protected
 +
* Maximum Power: 1.6W (Peak for Short Transmit Burst)
 +
* Low Power Modes: < 200uA
 +
* Reverse Polarity Protection
 +
 
 +
===Interface characteristics===
 +
* RS232 AT Command Interface
 +
* On / Off Control Lines
 +
 
 +
==Configuration==
 +
 
 +
===FMB Firmware implementation on FMC125===
 +
 
 +
In order to enable Iridium support on FMB, first it is necessary to enable RS232 support and select “satellite backup” mode. Correct configuration is shown in the picture below.
 +
 
 +
[[File:Iridium rs232 parameter config.png|center|500x500 px]]
 +
 
 +
Next, there are a couple of configurable options. In the SBD config, IridiumEdge should be enabled and save/send period Set. This section can be found in the “Features” tab in the configurator.
 +
 
 +
[[File:Sbd config configurator.png|center]]
 +
 
 +
===Setting up Alarm priority records===
 +
'''NOTE:''' In addition, you can select which IO element can generate Alarm priority record. The configurable IO parameters are listed as SBD IO source in list above. In order to do that you need to configure these IO elements as Panic priority. If properly configured SBD records are generated and sent if there is no GSM connection.
 +
<br></br>
 +
[[File:FMB640 iridium1.png]]
 +
<br></br>
 +
In the scenario shown in the above picture when panic record is made (generated by ''Digital Input 1'' or ''Digital Input 2'') internal 90 seconds timer will start to tick and if in that timeout device will not send the record through GPRS network it will be sent with Iridium satellites.
 +
 
 +
SBD Upload Limit is configurable and resets every month. This option can ensure that no additional data is used so that no unexpected costs are experienced by the customer. Default value is 8000 (for 8KB plan). This option can be disabled by setting Upload limit to 0.
 +
 
 +
'''NOTE:''' SBD IO source functionality is still being implemented.
 +
 
 +
===FMB Firmware configuration on FMX640/FMX641 devices===
 +
 
 +
FMX640 can be setup with Iridium Edge by activating RS232 short burst data parameters, this can be done visiting this tutorial [https://wiki.teltonika-gps.com/view/FMB641_Short_Burst_Data Here].
 +
 
 +
[[File:FMX640 and RS232 illustration v1.2.png|900x400px]]
 +
 
 +
[[File:Iridium Edge pinout.png|300px|left]]
 +
{| class="wikitable" style="width:70%;"
 +
|+
 +
! colspan="5" style="width:20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| PIN OUT Configuration
 +
|-
 +
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Pin Number
 +
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Signal Name
 +
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Color
 +
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Signal Direction (With respect to iridium edge)
 +
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Description
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 1
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Spare
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | White
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | -
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Unused
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 2
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Ground
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Brown
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Input
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Signal and power GND
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 3
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | RS232_RX
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Green
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Input
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | RS232 input
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 4
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | RS232_TX
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Yellow
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Output
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | RS232 output
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 5
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Power
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Pink
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Input
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 9-32 V positive terminal
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 6
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | ON/OFF
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Grey
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Input
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Optional line to power down Iridium edge
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 7
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Network available
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Blue
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Output
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | -
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 8
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Power detection
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Red
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Output
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Active high when Iridium Edge is powered
 +
|}
 +
 
 +
'''Important note:''' There is a noticeable difference in Iridium 8-pin cable layout from the standard version of the cable. We recommend purchasing a specific Iridium-made and certified 8-PIN cable directly from Teltonika. Please contact your administered sales representative to make an order.
 +
 
 +
==Communication Protocol==
 +
{| class="wikitable" style="width:50%;"
 +
|+
 +
! colspan="7" style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| SBD Packet structure
 +
|-
 +
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Timestamp
 +
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Longitude
 +
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Latitude
 +
! style="width:15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| SBD AVL ID and flags
 +
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| DIN/DOUT info
 +
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Reserved
 +
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Speed
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 4 bytes
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 3 bytes
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 3 bytes
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 1 bytes
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 1 bytes
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 1 bytes
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 1 bytes
 +
|}
 +
 
 +
'''Definitions'''
 +
 
 +
* Timestamp – Indicates when record was generated
 +
* Longitude - encoded in 3 bytes data. Server which gets this data should divide result from 46603,375 and subtract 180 in order to get actual longitude value. This coefficient is got in following way: 16777215(maximum 3 bytes value) divided from 360 (maximum longitude value then 180 is added). This calculation is used to fit negative and positive values to 3 bytes width variable.
 +
* Latitude - Latitude is calculated in same way as longitude but since latitude maximum value is two times smaller than longitude it can produce a bit more accurate data. Coefficient for latitude is 93206,75. This coefficient is got in following way: 16777215(maximum 3 bytes value) divided from 180 (maximum latitude value then 90 is added). This calculation is used to fit negative and positive values to 3 bytes width variable.
 +
* SBD AVL ID and flags – Custom id that will indicate what caused the record to be generated (as only periodic records are generated, id is not used)
 +
* Din/Dout info - Displays configured IO elements in parameter id 99422
 +
* Reserved - Not used anywhere, but left due to compatibility with fm6 project.
 +
* Speed – Indicates the speed of the vehicle if configured. If not (or in case of no gps) – will display 255
 +
 
 +
==Data Sending Parameters==
 +
Information here includes the data sending parameters which identifies the naming of the parameter in accordance to it's number.
 +
<br>
 +
{| class="wikitable"
 +
|+
 +
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Parameter ID'''
 +
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Parameter name'''
 +
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Min values'''
 +
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Max values'''
 +
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Default values'''
 +
! rowspan="1" style="width: 400px; background: #0054A6; color: white;" |'''Description'''
 +
|-
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |99420
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Iridium Edge
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |This parameter enables or disables Iridium Edge functionality
 +
|-
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |99421
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Save/Send period
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1440
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |1440
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |This parameter lets to configure Iridium Edge sending period
 +
|-
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |99422
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |SBD IO source
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |6
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |SBD IO elements which when enabled are included into the SBD record
 +
|-
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |151
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |RS232 Mode
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |26
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Implement ability to select "Sattelite backup"
 +
|-
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |99423
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |SBD Upload Limit
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |0
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |30000
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |8000
 +
| rowspan="1" style="text-align: center; style=" width: 150px; background: white; color: black;" |Limit to save user from exceeding the monthly plan. Max limit of 30000 due to 30KB plan. If set to 0 – limit will be off.
 +
|}
 +
 
 +
==Firmware errata==
 +
 
 +
===Firmware errata for FMX125===
 +
 
 +
{| class="wikitable" style="width: 100%;"
 +
|+
 +
|-
 +
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
 +
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
 +
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''03.28.04.Rev.104'''
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-11-29}}}
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
 +
*Added SBD message buffer limit of 300 messages
 +
*Fixed part of SBD records that were of empty size
 +
*Added NBLMULT callstack and abnormal restarts
 +
*Fixed FS spam on iridium initialization
 +
*Fixed incorrect timestamp from SBD Buffer
 +
*Added ability to use SBD buffer in transmitting FSM
 +
*Added ability to generate sbd_records with AVL id
 +
*Added ability to read messages from SBD Buffer
 +
*Added ability to save messages to SBD Buffer
 +
*Fixed iridium not detecting GSM connection
 +
*Fixed iridium communication issues
 +
*Fixed incorret data usege calculation
 +
*Fixed callstacks if iridium disconnected
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''03.28.04.Rev.100'''
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-06-17}}}
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
 +
* Added data usage limit for sending via Iridium
 +
* Added Iridium data sending logic
 +
* Added Iridium FSM for parsing iridium edge terminal messages
 +
* Added Irdium RS232 support
 +
* Added SBD Record format
 +
* Added implementation of configuration parameters for Iridium Edge control
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''03.28.04.Rev.00'''
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-03-17}}}
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
 +
* Fixed Lipo battery max voltage limit increased
 +
* Fixed no SMS response to short number
 +
* Fixed parameter 11712 cannot be configured with value 10
 +
* Added cpureset command to only work with external power
 +
* Added iButton file open/close traces
 +
* Fixed FMP100 LED constantly on after fw update
 +
* Added road sign CAN elements
 +
* Fixed security states P2 bitfield map fix
 +
* Fixed Jamming records saved as low priority
 +
* Fixed Fluid Market GGPS command
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''03.28.03.Rev.01'''
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2021-09-17}}}
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |
 +
*Initial release
 +
|-
 +
|}
 +
 
 +
 
 +
===Firmware errata for FMX640/641===
 +
{| class="wikitable" style="width: 100%;"
 +
|-
 +
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |FIRMWARE VERSION
 +
! style="width: 20%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: center;" |RELEASE DATE
 +
! style="width: 60%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |CHANGES
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.18.Rev.00'''
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |{{{release_date| 2022-11-29}}}
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Added advanced BLE Advertisement data are not send on server completely.
 +
Fixed no ID [1077]: 4 event generated after "Time TO Clear ID" timer ran out.
 +
Fixed event ID [1077]: 4 generation and DOUT setting to '1' on key clear timer exparation code added.
 +
Fixed FMB640 DOUTs bug fix, when DOUTs turns on for a moment after startup.
 +
Fixed CAN2 bus normal mode is not working.
 +
Added no BT changes and version/mod fix.
 +
Fixed after DriverAuthorization device does not send SMS bug fix.
 +
Added Contipressure new parameters.
 +
Fixed device reset after configuration saving
 +
Added Iridium Edge support
 +
Fixed AVL unnecessary records after restart.
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.17.Rev.00'''
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-05-24
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Fixed FMC640 Improve gprs context opening.
 +
Fixed FMC640 Improve new gprs configuration for BG96.
 +
Added LVCAN adapter compatibility over RS232 functionality.
 +
Fixed periodic AVL packet sending (when connecting to DDD server).
 +
Fixed RS232 Buffered long message when SD storage is used
 +
Added periodic total odometer value save (if moving).
 +
Added total odometer value save (on stop).
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.16.Rev.00'''
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-05-24
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Added allow not available (3,7) value for tachoraph driver.id IO.
 +
Fixed scenarios are saving records even if not enabled
 +
Fixed unstable additional beacons
 +
Fixed FMC64 stability (try socket connection once)
 +
Fixed jamming detection for FMC64 devices
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |'''01.02.15.Rev.00'''
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |2022-04-15
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: center; vertical-align: center; background: white;" |Initial FW release
 +
|}
 +
 
 +
==FAQ - Frequently asked questions regarding Teltonika Iridium Edge solution==
 +
 
 +
'''Here you will find answers to the most frequently asked questions about Teltonika Iridium Edge.'''
 +
 
 +
Please check available questions and answers to them here. If you are not able to find answer then fill the VIP HELP desk query.
 +
{| class="wikitable"
 +
|+
 +
! style="background: #0054A6; color: white;" |Question
 +
! style="background: #0054A6; color: white;" |Comments
 +
|-
 +
|Which Teltonika GPS trackers support Iridium Edge?
 +
|Teltonika FMC125 and FMX64x trackers support Iridium Edge currently.
 +
|-
 +
|With the FMX64 model, can CAN data be sent via Iridium data link?
 +
|CAN data be sent only using GSM link. Using Iridium data link you can send: Location, Speed, Ignition status, Panic button, DIN, DOUT, Crash detection (FMC125).
 +
|-
 +
|Can the data sending work for real-time monitoring? Or should it be scheduled for each x second/minutes reports?
 +
|No, it will start working when the connection is lost.
 +
|-
 +
|Does the device need to have certifications CE/FCC/PTCRB or any local ones?
 +
|Iridium Edge device certificates are to be found at <nowiki>https://www.iridium.com/products/iridium-edge/</nowiki>. Requirements for certification are decided by local governments.
 +
|-
 +
|What use cases do we have?
 +
|The use case is published here - https://teltonika-gps.com/industries/use-cases/logistics-tracking-in-remote-areas-using-iridium-connected-telematics-solution/. The solution is particularly useful for various applications, such as remote mining and construction, international logistics, wildlife tours, and remote team management, so more use cases will follow.
 +
|-
 +
|When working with iridium SBD, can GPS tracking device send data and also receive commands?
 +
|Iridium Edge is only able to send data, one way transmission.
 +
|-
 +
|Does Iridium Connected Telematics Solution have information available at teltonika wiki.
 +
|Yes, there is information available about Iridium Edge at https://wiki.teltonika-gps.com/view/Iridium_Edge.
 +
|-
 +
|Does Iridium Edge have IP67 rating?
 +
|The Iridium Edge has IP67 rating.
 +
|-
 +
|Does Iridium Edge has any power/Status LEDs?
 +
|Iridium Edge does not have power/status LEDS present at the moment.
 +
|-
 +
|Will there be the possibility of parallel operation of GSM and iridium?
 +
|Where there is no GSM connectivity, Iridium Edge will work, and when the vehicle enters the mobile coverage area, Iridium Edge solution will switch to it. If the device loses a GSM connection, it switches to Iridium network.
 +
|-
 +
|How many devices can I connect to one Iridium Edge modem?
 +
|There is possibility to connect only one device.
 +
|-
 +
|Would it be possible to get iridium satellite visibility in underground areas i.e: basement/tunnel/etc?
 +
|It is not possible to get Iridium Edge satellite visibility in undernground areas.
 +
|}
  
 
==External links==
 
==External links==
−
https://teltonika-gps.com/lt/product/iridium-edge/
+
https://teltonika-gps.com/lt/product/iridium_edge/
  
 
[[Category:Accessories]]
 
[[Category:Accessories]]

Revision as of 15:35, 15 December 2022

Main Page > Accessories > Iridium Edge

Iridium Edge features an all-in-one SBD module and antenna, with power supply. The plug-and-play satellite IoT terminal can be easily paired with FMB devices in order to expand their functionality to no GSM coverage zones. Current Iridium implementation offers ability to generate and send SBD records after set period after the GSM signal is lost. This ensures constant connectivity for the clients as Iridium network is available globally.

First Start

Wiring diagram

FMX125 device connection to Irridium edge via FMX125 devices.

Irridium new.jpg

FMX640 device connection to Irridium edge via FMX640 devices.

Iridium connwect.jpeg

Installation

Iridium Edge Quick Installation Guide document will show how to install Iridium Edge into the vehicle and prepare the device for configuration with our FMX640 and FMX125 family devices.

Please note: it is essential to follow all the instructions for effective installation, if any further questions arise, please contact your sales representative for more information.

Key Features

  • Hardware-Ready Device for Simple, Low Risk Integration
  • Satellite Add-On for Truly Global Coverage
  • Robust Power Supply for Industrial Installations
  • Certified in Key Geographic Markets
  • 180° Line of Sight for Compromised, Partially Blocked Locations

Network characteristics

  • Frequency: 1616 – 1626.5 MHz
  • Message Size: 14 Bytes (Receive), 14 Bytes (Transmit)
  • SBD Transceiver: Iridium 9602N
  • Antenna: Integrated Iridium® Certified Antenna

Environmental characteristics

  • Operating/Storage Temperature Range: -40C to 85C
  • Vibration: SAE J1455, Section 4.10

Mechanical characteristics

  • Dimensions (LxWxH): 130 x 80 x 30mm
  • Ingress Protection: IP 67
  • Side & Bottom Cable Exits
  • Connector: M12-8 pin male, terminated on 20cm
  • Pigtail Cable
  • Installation Options: Pole, Screw, Tape

Electrical characteristics

  • Power Supply: ( 9-32V), SAE J1455 Load Dump Protected
  • Maximum Power: 1.6W (Peak for Short Transmit Burst)
  • Low Power Modes: < 200uA
  • Reverse Polarity Protection

Interface characteristics

  • RS232 AT Command Interface
  • On / Off Control Lines

Configuration

FMB Firmware implementation on FMC125

In order to enable Iridium support on FMB, first it is necessary to enable RS232 support and select “satellite backup” mode. Correct configuration is shown in the picture below.

Iridium rs232 parameter config.png

Next, there are a couple of configurable options. In the SBD config, IridiumEdge should be enabled and save/send period Set. This section can be found in the “Features” tab in the configurator.

Sbd config configurator.png

Setting up Alarm priority records

NOTE: In addition, you can select which IO element can generate Alarm priority record. The configurable IO parameters are listed as SBD IO source in list above. In order to do that you need to configure these IO elements as Panic priority. If properly configured SBD records are generated and sent if there is no GSM connection.

FMB640 iridium1.png

In the scenario shown in the above picture when panic record is made (generated by Digital Input 1 or Digital Input 2) internal 90 seconds timer will start to tick and if in that timeout device will not send the record through GPRS network it will be sent with Iridium satellites.

SBD Upload Limit is configurable and resets every month. This option can ensure that no additional data is used so that no unexpected costs are experienced by the customer. Default value is 8000 (for 8KB plan). This option can be disabled by setting Upload limit to 0.

NOTE: SBD IO source functionality is still being implemented.

FMB Firmware configuration on FMX640/FMX641 devices

FMX640 can be setup with Iridium Edge by activating RS232 short burst data parameters, this can be done visiting this tutorial Here.

FMX640 and RS232 illustration v1.2.png

Iridium Edge pinout.png
PIN OUT Configuration
Pin Number Signal Name Color Signal Direction (With respect to iridium edge) Description
1 Spare White - Unused
2 Ground Brown Input Signal and power GND
3 RS232_RX Green Input RS232 input
4 RS232_TX Yellow Output RS232 output
5 Power Pink Input 9-32 V positive terminal
6 ON/OFF Grey Input Optional line to power down Iridium edge
7 Network available Blue Output -
8 Power detection Red Output Active high when Iridium Edge is powered

Important note: There is a noticeable difference in Iridium 8-pin cable layout from the standard version of the cable. We recommend purchasing a specific Iridium-made and certified 8-PIN cable directly from Teltonika. Please contact your administered sales representative to make an order.

Communication Protocol

SBD Packet structure
Timestamp Longitude Latitude SBD AVL ID and flags DIN/DOUT info Reserved Speed
4 bytes 3 bytes 3 bytes 1 bytes 1 bytes 1 bytes 1 bytes

Definitions

  • Timestamp – Indicates when record was generated
  • Longitude - encoded in 3 bytes data. Server which gets this data should divide result from 46603,375 and subtract 180 in order to get actual longitude value. This coefficient is got in following way: 16777215(maximum 3 bytes value) divided from 360 (maximum longitude value then 180 is added). This calculation is used to fit negative and positive values to 3 bytes width variable.
  • Latitude - Latitude is calculated in same way as longitude but since latitude maximum value is two times smaller than longitude it can produce a bit more accurate data. Coefficient for latitude is 93206,75. This coefficient is got in following way: 16777215(maximum 3 bytes value) divided from 180 (maximum latitude value then 90 is added). This calculation is used to fit negative and positive values to 3 bytes width variable.
  • SBD AVL ID and flags – Custom id that will indicate what caused the record to be generated (as only periodic records are generated, id is not used)
  • Din/Dout info - Displays configured IO elements in parameter id 99422
  • Reserved - Not used anywhere, but left due to compatibility with fm6 project.
  • Speed – Indicates the speed of the vehicle if configured. If not (or in case of no gps) – will display 255

Data Sending Parameters

Information here includes the data sending parameters which identifies the naming of the parameter in accordance to it's number.

Parameter ID Parameter name Min values Max values Default values Description
99420 Iridium Edge 0 1 0 This parameter enables or disables Iridium Edge functionality
99421 Save/Send period 0 1440 1440 This parameter lets to configure Iridium Edge sending period
99422 SBD IO source 0 6 0 SBD IO elements which when enabled are included into the SBD record
151 RS232 Mode 0 26 0 Implement ability to select "Sattelite backup"
99423 SBD Upload Limit 0 30000 8000 Limit to save user from exceeding the monthly plan. Max limit of 30000 due to 30KB plan. If set to 0 – limit will be off.

Firmware errata

Firmware errata for FMX125

FIRMWARE VERSION RELEASE DATE CHANGES
03.28.04.Rev.104 2022-11-29
  • Added SBD message buffer limit of 300 messages
  • Fixed part of SBD records that were of empty size
  • Added NBLMULT callstack and abnormal restarts
  • Fixed FS spam on iridium initialization
  • Fixed incorrect timestamp from SBD Buffer
  • Added ability to use SBD buffer in transmitting FSM
  • Added ability to generate sbd_records with AVL id
  • Added ability to read messages from SBD Buffer
  • Added ability to save messages to SBD Buffer
  • Fixed iridium not detecting GSM connection
  • Fixed iridium communication issues
  • Fixed incorret data usege calculation
  • Fixed callstacks if iridium disconnected
03.28.04.Rev.100 2022-06-17
  • Added data usage limit for sending via Iridium
  • Added Iridium data sending logic
  • Added Iridium FSM for parsing iridium edge terminal messages
  • Added Irdium RS232 support
  • Added SBD Record format
  • Added implementation of configuration parameters for Iridium Edge control
03.28.04.Rev.00 2022-03-17
  • Fixed Lipo battery max voltage limit increased
  • Fixed no SMS response to short number
  • Fixed parameter 11712 cannot be configured with value 10
  • Added cpureset command to only work with external power
  • Added iButton file open/close traces
  • Fixed FMP100 LED constantly on after fw update
  • Added road sign CAN elements
  • Fixed security states P2 bitfield map fix
  • Fixed Jamming records saved as low priority
  • Fixed Fluid Market GGPS command
03.28.03.Rev.01 2021-09-17
  • Initial release


Firmware errata for FMX640/641

FIRMWARE VERSION RELEASE DATE CHANGES
01.02.18.Rev.00 2022-11-29 Added advanced BLE Advertisement data are not send on server completely.

Fixed no ID [1077]: 4 event generated after "Time TO Clear ID" timer ran out. Fixed event ID [1077]: 4 generation and DOUT setting to '1' on key clear timer exparation code added. Fixed FMB640 DOUTs bug fix, when DOUTs turns on for a moment after startup. Fixed CAN2 bus normal mode is not working. Added no BT changes and version/mod fix. Fixed after DriverAuthorization device does not send SMS bug fix. Added Contipressure new parameters. Fixed device reset after configuration saving Added Iridium Edge support Fixed AVL unnecessary records after restart.

01.02.17.Rev.00 2022-05-24 Fixed FMC640 Improve gprs context opening.

Fixed FMC640 Improve new gprs configuration for BG96. Added LVCAN adapter compatibility over RS232 functionality. Fixed periodic AVL packet sending (when connecting to DDD server). Fixed RS232 Buffered long message when SD storage is used Added periodic total odometer value save (if moving). Added total odometer value save (on stop).

01.02.16.Rev.00 2022-05-24 Added allow not available (3,7) value for tachoraph driver.id IO.

Fixed scenarios are saving records even if not enabled Fixed unstable additional beacons Fixed FMC64 stability (try socket connection once) Fixed jamming detection for FMC64 devices

01.02.15.Rev.00 2022-04-15 Initial FW release

FAQ - Frequently asked questions regarding Teltonika Iridium Edge solution

Here you will find answers to the most frequently asked questions about Teltonika Iridium Edge.

Please check available questions and answers to them here. If you are not able to find answer then fill the VIP HELP desk query.

Question Comments
Which Teltonika GPS trackers support Iridium Edge? Teltonika FMC125 and FMX64x trackers support Iridium Edge currently.
With the FMX64 model, can CAN data be sent via Iridium data link? CAN data be sent only using GSM link. Using Iridium data link you can send: Location, Speed, Ignition status, Panic button, DIN, DOUT, Crash detection (FMC125).
Can the data sending work for real-time monitoring? Or should it be scheduled for each x second/minutes reports? No, it will start working when the connection is lost.
Does the device need to have certifications CE/FCC/PTCRB or any local ones? Iridium Edge device certificates are to be found at https://www.iridium.com/products/iridium-edge/. Requirements for certification are decided by local governments.
What use cases do we have? The use case is published here - https://teltonika-gps.com/industries/use-cases/logistics-tracking-in-remote-areas-using-iridium-connected-telematics-solution/. The solution is particularly useful for various applications, such as remote mining and construction, international logistics, wildlife tours, and remote team management, so more use cases will follow.
When working with iridium SBD, can GPS tracking device send data and also receive commands? Iridium Edge is only able to send data, one way transmission.
Does Iridium Connected Telematics Solution have information available at teltonika wiki. Yes, there is information available about Iridium Edge at https://wiki.teltonika-gps.com/view/Iridium_Edge.
Does Iridium Edge have IP67 rating? The Iridium Edge has IP67 rating.
Does Iridium Edge has any power/Status LEDs? Iridium Edge does not have power/status LEDS present at the moment.
Will there be the possibility of parallel operation of GSM and iridium? Where there is no GSM connectivity, Iridium Edge will work, and when the vehicle enters the mobile coverage area, Iridium Edge solution will switch to it. If the device loses a GSM connection, it switches to Iridium network.
How many devices can I connect to one Iridium Edge modem? There is possibility to connect only one device.
Would it be possible to get iridium satellite visibility in underground areas i.e: basement/tunnel/etc? It is not possible to get Iridium Edge satellite visibility in undernground areas.

External links

https://teltonika-gps.com/lt/product/iridium_edge/

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Iridium_Edge&oldid=78557"