Private/Business Driving Mode Functionality

From Wiki Knowledge Base | Teltonika GPS
Main Page > General Information > Usage scenarios > Private/Business Driving Mode Functionality

Solution description

Allowing employees to drive company vehicles for personal reasons is a widespread practice. It is an attractive perk for employees, assisting business owners to hire skilled people and boost its competitiveness. But how to effectively monitor and manage this process, generate reports and avoid a car misuse trouble-free way? To assist businesses with this, Teltonika Telematics has developed a special GPS tracker mode.
This solution will allow your company car to be used by employees for personal purposes without violating the EU General Data Protection Regulations. Moreover, self-employed people can easily convert their own car into a business asset and ensure that the data provided (such as distance traveled) is correct, because using FMP100 is simple as it can be.

What you need for a solution?

  • FMP100 device
  • Teltonika Configurator to set up FM device correctly for the solution.
  • Dedicated firmware version 03.27.07.Rev.461 (please contact you sales manager for the newest version)
  • SIM card in order to get data to your server
  • FOTA WEB to remotely send the configuration to the device.

Installation

The device is easy to install, but keep in mind that although the devices have high-gain antennas, it is important to mount the devices with engraving on top and in metal-free space. For example if you have several 12V sockets in a van, you should not choose one in the back cabin.


Figure 1. Recommended mounting location

Configuration

1. Prerequisites:

1.1. Read through First start guide

1.2. Understanding of possible Sleep modes.


2. Configuring Private/Business Mode Scenario

  • Configure the APN in GPRS settings.



  • 2001 – APN
  • 2002 – APN username (No APN username > leave the field blank)
  • 2003 – APN password (No APN password > leave the field blank)




  • Configure the server in GPRS settings.


  • 2004 – Domain
  • 2005 – Port
  • 2006 – Data sending protocol (0 – TCP, 1 – UDP)



  • Enable Codec 8 Extended in System settings.


  • Parameter ID: 113 – Codec 8 Extended (0 – Codec 8, 1 – Codec 8 Extended)

AVL parameters greater than 255 (HEX 0xFF) require “Codec 8 extended” to be sent to the server.


  • Select priority in Trip \ Odometer.




  • Parameter ID: 11800 – Priority settings (0 – Disable, 1 – Low priority, 2 - High priority, 3 - Panic priority)



  • Enable Eventual Records in Trip \ Odometer.




  • Choose a trigger to change trip mode in Trip \ Odometer.


  • Parameter ID: 11811Triggers (16 – BTApp, 32 – NBL-1 Button1, 64 – NBL-1 Button2, 128 – FMP100 Button, 255 – Enable All)




  • Choose what position should device send when Private mode is enabled in Trip \ Odometer.


  • Parameter ID: 11813GPS Data Masking (0 – Normal, 1 – Data sent as Zero, 2 – Last good known position)




  • Choose whether the distance traveled in private mode should be included in the total odometer in Trip \ Odometer.





  • Choose by what event device should deactivate Private mode in Trip \ Odometer.


  • Parameter ID: 11816Deactivate by (0 – Disable, 1 – Towing detection, 2 – Unplug detection, 4 – Crash detection, 8 – Autogeofence, 15 – Enable All)



  • Choose what trigger type will enable Private mode in Trip \ Odometer.




Quickstart: From default configuration to Pay As You Drive solution in one SMS:

<SMS Login> <SMS Password> setparam 113:1;11800:1;11814:1;11811:128;11813:2;11815:1;11816:4;11849:0

Parsing information

1.Prerequisites

1.1. Open TCP/UDP port

1.2. Read Java parser first start guide

2. Parsing example

Unparsed received data in hexadecimal stream
AVL Data Packet Part HEX Code Part
Zero Bytes 00 00 00 00
Data Field Length
Codec ID 8E (Codec 8 Extended)
Number of Data 1 (Number of Total Records)
Timestamp
Priority
Longitude
Latitude
Altitude
Angle
Satellites
Speed
Event IO ID
N of Total ID
N1 of One Byte IO
1’st IO ID
1’st IO Value
2’nd IO ID
2’nd IO Value
3’rd IO ID
3’rd IO Value
4’th IO ID
4’th IO Value
5’th IO ID
5’th IO Value
N2 of Two Bytes IO
1’st IO ID
1’st IO Value
2’nd IO ID
2’nd IO Value
3’rd IO ID
3’rd IO Value
4’th IO ID
4’th IO Value
N4 of Two Bytes IO
1’st IO ID
1’st IO Value
2’nd IO ID
2’nd IO Value
N8 of Two Bytes IO
NX of X Byte IO
Number of Data 2 (Number of Total Records)
CRC-16

Server response: 00000001

Please see Codec 8 Extended for more information.