View source for How to capture remote Tacho log from FM device?

__TOC__
==Supported devices==
'''Solution applies for these devices:'''
<!-- [[FMA110]] [[FMA120]] [[FMA202]] [[FMA204]][[FM6300]] [[FM3612]] [[FM3622]] [[FM36M1]] -->
* [[FM6300]]/[[FMB630]]/[[FM6320]]
* [[FMB640]]
* [[FMC640]]
* [[FMM640]]
* [[FMB641]]
* [[FMC650]]
* [[FMM650]]

==How does it work?==
Fleet management devices Tacho log capturing is initiated using the command <code>log2srv</code> and by setting the right configuration. The device establishes a GPRS connection and activates the link to the computer, log starts to stream to the computer until the set time is elapsed. To stop streaming log immediately <code>log2srvstop</code> is used.

==Steps to collect log files on FM6300, FMB630, FM6320, FMB640, FMC640, FMM640 and FMB641==
Here are steps on how to capture a Tacho online log from FM series devices:
# Make sure you have '''external IP address''' with '''opened TCP port'''. This could be checked [http://canyouseeme.org/ here].
# Download "'''Hercules'''" program from [https://www.hw-group.com/software/hercules-setup-utility www.hw-group.com] and start it.<p><table class="wikitable" style="width: 100%;"><tr><td style="width: 50%; border: 1px solid white; background: white;">Go to '''(1) TCP Server''' → '''(2)''' Enter your '''opened TCP port''' → '''(3)''' Press '''Listen''' then click right mouse button over '''Received''' or '''Sent data''' window → '''(4)''' Go to '''Special Chars''' → '''(5)''' Set '''ASCII Names'''.</td><td style="width: 50%; border: 1px solid white; background: white;">Click right mouse button over '''Received''' or '''Sent data''' window → '''(1)''' Go to '''Log to File''' → '''(2)''' Set '''file name''' and '''directory''' where captured log will be saved → '''(3)''' Press '''Log Enable'''.</td></tr><tr><td style="width: 50%; border: 1px solid white; background: white;">[[Image:Hercule_listen_asci.png|400px|left]]</td><td style="width: 50%; border: 1px solid white; background: white;"> [[Image:Hercules_log_enable.png|500px|left]]</td></tr></table></p>
# Make sure that the FM device is '''turned on''' and the vehicle's ignition is turned on.
# Send following '''SMS command''' to FM device: 
#* If you have set SMS login and password: <code>login pass log2srv 1,6,'''APN''','''APNusername''','''APNpassword''','''IP''','''port''',1200,0</code><p>'''APN''' - Operator APN name of the SIM card, which is inserted into the device from which the log will be captured.</p><p>'''APNusername''' - Operator APN username of the SIM card, which is inserted into the device from which the log will be captured.</p><p>'''APNpassword''' - Operator APN password of the SIM card, which is inserted into the device from which the log will be captured.</p><p>'''IP''' - External IP address of the computer to which the device will connect.</p><p>'''port''' - Opened TCP port (used in '''Hercules''') of external ip address to which the device will connect.</p><p>Command example: <code>opa opa log2srv 1,6,banga,,,212.59.13.226,7056,1200,0</code></p>
#* If SMS login and password are not set to leave two spaces before the command: <code><span style="color:#f8f9fa">aa</span>log2srv 1,6,'''APN''','''APNusername''','''APNpassword''','''IP''','''port''',1200,0</code><p>If the command was sent correctly you should receive SMS Response:<code>LOG2SRV OK=1, 6, IP, port, 1200, 0</code></p><p>[[File:Alert.png|50px|left|link=]]<b>Up to 5 minutes delay could appear if wrong <code>log2srv</code> commands settings will be sent, during that time no SMS or GPRS command could be received. SMS will be hanging, after timeout, hanging SMS’s will be proceeded.</b></p>
# After successful '''SMS response''' device will start streaming log to '''Hercules''' program. '''(1)''' Logfile bytes will start increasing and '''(2)''' connected device will appear. Device log will be captured for '''20 minutes'''.<p>[[File:Hercules_connected.png|400px]]
# After the log will start coming send the following command, which will force the device connection to the remote DDD download platform:
#* If you have set SMS login and password: <code>login pass tacho_connect</code>
#* If SMS login and password are not set to leave two spaces before the command: <code><span style="color:#f8f9fa">aa</span>tacho_connect</code>
#Provide captured log to your '''Teltonika Sales Manager''' or '''Teltonika Support team''' for further investigation.
</p>
<p>If you want to stop log capturing immediately send following '''SMS command''' to FM device:</p>
* If you have set SMS login and password: <code>login pass log2srvstop</code>
* If SMS login and password are not set to leave two spaces before the command: <code><span style="color:#f8f9fa">aa</span>log2srvstop</code>

==Steps to collect log file on FMC650 and FMM650 devices==
With 03.00.15.Rev.09 and newer FW additional filters are available, and their numeration is different. In this part logging of FMx650 will be covered.

Here are steps on how to capture a Tacho online log from FM65 series devices:
# Make sure you have '''external IP address''' with '''opened TCP port'''. This could be checked [http://canyouseeme.org/ here].
# Download "'''Hercules'''" program from [https://www.hw-group.com/software/hercules-setup-utility www.hw-group.com] and start it.<p><table class="wikitable" style="width: 100%;"><tr><td style="width: 50%; border: 1px solid white; background: white;">Go to '''(1) TCP Server''' → '''(2)''' Enter your '''opened TCP port''' → '''(3)''' Press '''Listen''' then click right mouse button over '''Received''' or '''Sent data''' window → '''(4)''' Go to '''Special Chars''' → '''(5)''' Set '''ASCII Names'''.</td><td style="width: 50%; border: 1px solid white; background: white;">Click right mouse button over '''Received''' or '''Sent data''' window → '''(1)''' Go to '''Log to File''' → '''(2)''' Set '''file name''' and '''directory''' where captured log will be saved → '''(3)''' Press '''Log Enable'''.</td></tr><tr><td style="width: 50%; border: 1px solid white; background: white;">[[Image:Hercule_listen_asci.png|400px|left]]</td><td style="width: 50%; border: 1px solid white; background: white;"> [[Image:Hercules_log_enable.png|500px|left]]</td></tr></table></p>
# Make sure that the FM device is '''turned on''' and the vehicle's ignition is turned on.
# Send following '''SMS command''' to FM device: 
#* If you have set SMS login and password: <code>login pass log2srv 1,<u>16</u>,'''APN''','''APNusername''','''APNpassword''','''IP''','''port''',1200,0</code><p>'''APN''' - Operator APN name of the SIM card, which is inserted into the device from which the log will be captured.</p><p>'''APNusername''' - Operator APN username of the SIM card, which is inserted into the device from which the log will be captured.</p><p>'''APNpassword''' - Operator APN password of the SIM card, which is inserted into the device from which the log will be captured.</p><p>'''IP''' - External IP address of the computer to which the device will connect.</p><p>'''port''' - Opened TCP port (used in '''Hercules''') of external ip address to which the device will connect.</p><p>Command example: <code>opa opa log2srv 1,<u>16</u>,banga,,,212.59.13.226,7056,1200,0</code></p>
#* If SMS login and password are not set to leave two spaces before the command: <code><span style="color:#f8f9fa">aa</span>log2srv 1,<u>16</u>,'''APN''','''APNusername''','''APNpassword''','''IP''','''port''',1200,0</code><p>If the command was sent correctly you should receive SMS Response:<code>LOG2SRV OK=1, 16, IP, port, 1200, 0</code></p><p>[[File:Alert.png|50px|left|link=]]<b>Up to 5 minutes delay could appear if wrong <code>log2srv</code> commands settings will be sent, during that time no SMS or GPRS command could be received. SMS will be hanging, after timeout, hanging SMS’s will be proceeded.</b></p>
# After successful '''SMS response''' device will start streaming log to '''Hercules''' program. '''(1)''' Logfile bytes will start increasing and '''(2)''' connected device will appear. Device log will be captured for '''20 minutes'''.<p>[[File:Hercules_connected.png|400px]]
# After the log will start coming send the following command, which will force the device connection to the remote DDD download platform:
#* If you have set SMS login and password: <code>login pass tacho_connect</code>
#* If SMS login and password are not set to leave two spaces before the command: <code><span style="color:#f8f9fa">aa</span>tacho_connect</code>
#Provide captured log to your '''Teltonika Sales Manager''' or '''Teltonika Support team''' for further investigation.
</p>
<p>If you want to stop log capturing immediately send following '''SMS command''' to FM device:</p>
* If you have set SMS login and password: <code>login pass log2srvstop</code>
* If SMS login and password are not set to leave two spaces before the command: <code><span style="color:#f8f9fa">aa</span>log2srvstop</code>

==How the received tacho log should look like==
Collect log should contain similar lines with <b>[TACHO]</b> in the front of the message, example:<br>
<code>
...<br>
[TACHO]  TCP PACKET SENT<br>
[TACHO]  <STATUS> packet was send to server<br>
[TACHO]  FSM:542 ret:2<br>
[TACHO]  START_RESUME SEND_OK<br>
[TACHO]  RESUME MODES ALLOWED: 0x43, Seq: 0x00<br>
[TACHO]  State change @1505:0.3 -> 0.4<br>
[TACHO]  Data:c-1-10-0-0 cmd len:33<br>
...<br>
</code>
<br>
<b>Please note,</b> that real log would have much more information, but the Tacho log should have lines <b>[TACHO]</b> 
[[Category: Frequently Asked Questions - FAQ]]