Difference between revisions of "How to check available OBDII data?"

From Wiki Knowledge Base | Teltonika GPS
(26 intermediate revisions by 6 users not shown)
Line 1: Line 1:
===Please follow this tutorial to check what OBD data is available from the vehicle===
+
===To check or OBD data is available from OBD device, please follow the instructions===
  
1. Send ''[[FMB obdinfo|obdinfo]]'' SMS/GPRS command to the device.
+
Send to device the command ''[[FMB obdinfo|obdinfo]]''.
 +
<br/>
  
2. The device responds with: Protocol, VIN, Adaptive Timing value, requested PID counter, OBD application state, available vehicle PIDs, mil status, number of DTCs.
+
The device responds with:<br/> Protocol, VIN, AdaptiveTiming value, requested PID counter, OBD application state, available vehicle PIDs, mil status, number of DTCs<br/><br/>
 
+
For example: Protocol:6,VIN:WVWZZZAUZFW125650,TM:0,CNT:11,ST:PROTOCOL DETECTION,P1:0x98180001,P2:0x1,P3:0xE0800020,P4:0x0,Fuel:OFF,MIL:0,DTC:0,ID0
For example: Protocol:6 VIN: WVWZZZAUZFW125650,TM:0,CNT:11,ST:PROTOCOL DETECTION,P1:0x98180001,P2:0x1,P3:0xE0800020,P4:0x0,Fuel:OFF,MIL:0,DTC:0,ID0
+
<br/><br/>
 
+
According to obdinfo response you can check available OBD parameters via OBD Pid Reader. OBD reader can be found [https://www.glmsoftware.com/Downloads1.aspx here]
3. According to the old info response, you can check available OBD parameters via OBD PID Reader. OBD reader can be found [https://www.glmsoftware.com/Downloads1.aspx '''here''']
+
<br/><br/>
 
+
[[Image:OBDII_SCAN.png|center]]
[[Image:How to check available OBDII data 1.gif|center]]
+
Protocol:6 – specifies car supported protocol<br/>
 
+
VIN:WVWZZZAUZFW125650 -specifies car vin number<br/>
Protocol:6 – specifies the protocol supported by the car.
+
ST:PROTOCOLDETECTION- specifies OBD application state<br/>
 
+
P1:0x98180001,P2:0x1,P3:0xE0800020,P4:0x0 - specifies available vehicle PIDs. These values specifies available parameters in car. If all pids values 0 (P1:0x0,P2:0x0,P3:0x0,P4:0x0), it means that OBD parameters is not readable.<br/>
VIN: WVWZZZAUZFW125650 - specifies car VIN number.
+
MIL:0 - mil status, indicates state of the led(0- OFF, 1-ON)<br/>
 
+
DTC:0 - number of errors<br/>
ST: PROTOCOLDETECTION - specifies the OBD application state.
+
Please find additional information here:<br/>
 
+
[https://wiki.teltonika-gps.com/view/FMB001_Supported_OBD_protocols '''OBDII protocols supported by the FMB001 and FM3001''']  
P1:0x98180001,P2:0x1,P3:0xE0800020,P4:0x0 - specifies available vehicle PIDs. These values denote the available parameters in a given car. If all PID values are 0 (P1:0x0,P2:0x0,P3:0x0,P4:0x0), it means that OBD parameters are not readable.
+
https://wiki.teltonika-gps.com/view/Template:FMB_Device_Family_Parameter_list#OBD_II_.28Blue-tooth.29
 
 
MIL:0 - mil status, indicates the state of the LED (0- OFF, 1-ON).
 
 
 
DTC:0 – the number of errors.
 
 
 
Please find additional information here:
 
 
 
#[https://wiki.teltonika-gps.com/view/FMB001_Supported_OBD_protocols '''OBDII protocols supported by the FMB001 and FM3001''']  
 
#[https://wiki.teltonika-gps.com/view/Template:FMB_Device_Family_Parameter_list#OBD_II_.28Blue-tooth.29 '''OBDII parameter list''']
 
 
 
[[Category: Frequently Asked Questions - FAQ]]
 

Revision as of 17:38, 2 April 2019

Main Page > Frequently Asked Questions - FAQ > How to check available OBDII data?

To check or OBD data is available from OBD device, please follow the instructions

Send to device the command obdinfo.

The device responds with:
Protocol, VIN, AdaptiveTiming value, requested PID counter, OBD application state, available vehicle PIDs, mil status, number of DTCs

For example: Protocol:6,VIN:WVWZZZAUZFW125650,TM:0,CNT:11,ST:PROTOCOL DETECTION,P1:0x98180001,P2:0x1,P3:0xE0800020,P4:0x0,Fuel:OFF,MIL:0,DTC:0,ID0

According to obdinfo response you can check available OBD parameters via OBD Pid Reader. OBD reader can be found here

OBDII SCAN.png

Protocol:6 – specifies car supported protocol
VIN:WVWZZZAUZFW125650 -specifies car vin number
ST:PROTOCOLDETECTION- specifies OBD application state
P1:0x98180001,P2:0x1,P3:0xE0800020,P4:0x0 - specifies available vehicle PIDs. These values specifies available parameters in car. If all pids values 0 (P1:0x0,P2:0x0,P3:0x0,P4:0x0), it means that OBD parameters is not readable.
MIL:0 - mil status, indicates state of the led(0- OFF, 1-ON)
DTC:0 - number of errors
Please find additional information here:
OBDII protocols supported by the FMB001 and FM3001 https://wiki.teltonika-gps.com/view/Template:FMB_Device_Family_Parameter_list#OBD_II_.28Blue-tooth.29