Difference between revisions of "How to capture OBDII data log?"
From Wiki Knowledge Base | Teltonika GPS
m (Text replacement - "Bluetooth(?!®)" to "Bluetooth®") Tags: Mobile edit Mobile web edit |
|||
(15 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
− | + | Here are steps how to capture OBDII log from Teltonika devices with Bluetooth OBDII dongle or directly supporting OBDII data reading<p>This functionality is available after '''03.08.00''' firmware version.</p> | |
− | |||
− | Here are steps how to capture OBDII log from Teltonika devices with | ||
#Make sure that the CAN adapter is connected properly to the vehicle and to the FMB1YX series device. | #Make sure that the CAN adapter is connected properly to the vehicle and to the FMB1YX series device. | ||
− | # | + | #Start vehicle engine (skip if vehicle is deployed) |
#Send following '''SMS commands''' to Teltonika tracker: | #Send following '''SMS commands''' to Teltonika tracker: | ||
− | ##If you have set SMS login and password:<code>login pass sdformat</code>< | + | ##If you have set SMS login and password:<code>login pass sdformat</code> <code>'''Note:'''This will delete all previous DUMP logs without and records that have not been sent yet.</code> If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>sdformat</code> |
− | ##If you have set SMS login and password:<code>login pass log2sdfilterset 0;2;4;1</code> | + | ##If you have set SMS login and password:<code>login pass log2sdfilterset 0;2;4;1</code> If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;2;4;1</code> Filter description: Filter 0 - default filters (No additional data) Filter 2 - turn on AVL record creation filter Filter 4 - turn on CAN adapter filter Filter 7 - BT3 connection filter (only needed when troubleshooting OBDII devices connected via BT) Filter 1 - save installed filters to memory after restart If command <code>log2sdfilterset</code> was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:4</code> then you can restart the device |
− | |||
− | |||
− | |||
− | |||
− | |||
##If you have set SMS login and password: <code>login pass cpureset</code> | ##If you have set SMS login and password: <code>login pass cpureset</code> | ||
− | ##If SMS login and password are not set | + | ##If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>cpureset</code> |
#After the SMS response message CAN adapter log capturing has been started. | #After the SMS response message CAN adapter log capturing has been started. | ||
#Wait at least '''5 minutes''' to get enough OBDII data and '''turn off''' vehicle engine (skip if vehicle is deployed) | #Wait at least '''5 minutes''' to get enough OBDII data and '''turn off''' vehicle engine (skip if vehicle is deployed) | ||
#'''Download''' captured log (dump) files. | #'''Download''' captured log (dump) files. | ||
− | # | + | #*Using '''Teltonika Configurator'''[[File:dumpfilesfromcfg.gif|center|link=https://wiki.teltonika-gps.com/view/File:Dumpfilesfromcfg.gif]]<p>Please check [[FMB120_Status_info#Maintenance|Status info→Maintenance→Log/Dump]] and download dump <code>YYYY_MM_DD_HH_MM_SS_FMB1YX_IMEI_Dump.zip</code>.</p> |
− | + | #*Using '''FOTA WEB'''[[File:FOTAWEB.gif|center|link=https://wiki.teltonika-gps.com/view/File:FOTAWEB.gif]]Enter FOTA WEB → Press on '''Devices''' tab → Select your device and press [[File:Fota_actions.png|90px|link=]] → '''Download from device''' → '''Continuous log files (2)''' (<span>2 files. Each log size up to 1 MB</span>)→[[File:Fota_download.png|90px|link=]]. To start download process at once send following SMS command: | |
− | [[File:dumpfilesfromcfg.gif|center|link=https://wiki.teltonika-gps.com/view/File:Dumpfilesfromcfg.gif]]<p>Please check [[FMB120_Status_info#Maintenance|Status info→Maintenance→Log/Dump]] and download dump <code>YYYY_MM_DD_HH_MM_SS_FMB1YX_IMEI_Dump.zip</code>.</p> | + | #**If you have set SMS login and password: <code>login pass web_connect</code> |
− | # | + | #**If SMS login and password are not set leave two spaces before command: <code><span>aa</span>web_connect</code><p>If command was sent correctly you should receive SMS Response:<code>web_connect resp:OK</code></p><p>To find downloaded log press on device [[File:Fota_moreinfo.png|link=]] icon→Go to '''CONT.LOGS tab'''→Download <code>IMEI_TIMESTAMP.zip</code></p> |
− | + | #After you have downloaded log files send following '''SMS command''' to FMX1YX device: | |
− | |||
− | #*If you have set SMS login and password: <code>login pass web_connect</code> | ||
− | #*If SMS login and password are not set leave two spaces before command: <code><span | ||
− | #After you have downloaded log files send following '''SMS command''' to | ||
#*If you have set SMS login and password: <code>login pass log2sdfilterset 0</code> | #*If you have set SMS login and password: <code>login pass log2sdfilterset 0</code> | ||
#*If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0</code><p>If command was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:1</code></p> | #*If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0</code><p>If command was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:1</code></p> | ||
− | #These log (dump) files can be read only with '''special software'''. Provide these files to your '''Teltonika | + | #These log (dump) files can be read only with '''special software'''. Provide these files to your '''Teltonika Sales manager''' or '''Teltonika Support team''' for further investigation. |
− | |||
− |
Revision as of 13:20, 22 December 2020
Main Page > Frequently Asked Questions - FAQ > How to capture OBDII data log?Here are steps how to capture OBDII log from Teltonika devices with Bluetooth OBDII dongle or directly supporting OBDII data reading
This functionality is available after 03.08.00 firmware version.
- Make sure that the CAN adapter is connected properly to the vehicle and to the FMB1YX series device.
- Start vehicle engine (skip if vehicle is deployed)
- Send following SMS commands to Teltonika tracker:
- If you have set SMS login and password:
login pass sdformat
Note:This will delete all previous DUMP logs without and records that have not been sent yet.
If SMS login and password are not set leave two spaces before command:aasdformat
- If you have set SMS login and password:
login pass log2sdfilterset 0;2;4;1
If SMS login and password are not set leave two spaces before command:aalog2sdfilterset 0;2;4;1
Filter description: Filter 0 - default filters (No additional data) Filter 2 - turn on AVL record creation filter Filter 4 - turn on CAN adapter filter Filter 7 - BT3 connection filter (only needed when troubleshooting OBDII devices connected via BT) Filter 1 - save installed filters to memory after restart If commandlog2sdfilterset
was sent correctly you should receive SMS Response:Enabled Trace Filters:4
then you can restart the device - If you have set SMS login and password:
login pass cpureset
- If SMS login and password are not set leave two spaces before command:
aacpureset
- If you have set SMS login and password:
- After the SMS response message CAN adapter log capturing has been started.
- Wait at least 5 minutes to get enough OBDII data and turn off vehicle engine (skip if vehicle is deployed)
- Download captured log (dump) files.
- Using Teltonika Configurator
Please check Status info→Maintenance→Log/Dump and download dump
YYYY_MM_DD_HH_MM_SS_FMB1YX_IMEI_Dump.zip
. - Using FOTA WEBEnter FOTA WEB → Press on Devices tab → Select your device and press
→ Download from device → Continuous log files (2) (2 files. Each log size up to 1 MB)→
. To start download process at once send following SMS command:
- If you have set SMS login and password:
login pass web_connect
- If SMS login and password are not set leave two spaces before command:
aaweb_connect
If command was sent correctly you should receive SMS Response:
web_connect resp:OK
To find downloaded log press on device
icon→Go to CONT.LOGS tab→Download
IMEI_TIMESTAMP.zip
- If you have set SMS login and password:
- Using Teltonika Configurator
- After you have downloaded log files send following SMS command to FMX1YX device:
- If you have set SMS login and password:
login pass log2sdfilterset 0
- If SMS login and password are not set leave two spaces before command:
aalog2sdfilterset 0
If command was sent correctly you should receive SMS Response:
Enabled Trace Filters:1
- If you have set SMS login and password:
- These log (dump) files can be read only with special software. Provide these files to your Teltonika Sales manager or Teltonika Support team for further investigation.