Difference between revisions of "How to start with FMB devices and Sensors?"

Revision as of 11:25, 31 December 2020

Main Page > Frequently Asked Questions - FAQ > How to start with FMB devices and Sensors?

Configuring BLE Sensor

Bluetooth BLE Sensor are disabled by default.
Configurations to these beacons are written through NFC.
To do this download Device Manager Mobile by Ela from Google Play Store to your Android-powered device.
Note! Android-powered device that is used for configuring BLE sensors must support NFC read/write functionality.

Follow these instructions to easily configure BLE Sensor:

Enable Bluetooth and NFC on your Android-powered device.
Launch Device Manager Mobile on your Android-powered device.
Select Configuration.
Place your Android-powered device on top of BLE Sensors to scan it.
Click Enable to allow BLE Sensors transmit advertising data.
We recommend to set Power to 4 to get the best possible distance.
Set TAG Format to Sensor.
Set BLE Emit Period to 1 second to get the best possible sensor detection.
Click Write button.
Place your Android-powered device on top of BLE sensor to write configuration to it.

Once the configuration is written successfully, the BLE Sensor will be enabled and use the settings configured in the APP.
Note! Make sure that Manufacturer data mode is Disabled, otherwise Sensor will not be detected without additional changes in configuration.

Sensor Configuration and data sending

Open FM device configurator.

In System Settings Enable Codec8 Extended;

In Bluetooth 4.0 settings, set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;

Steps to follow according to the visual represenation

In Bluetooth settings Enable Bluetooth, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth will be disabled;
In Bluetooth 4.0 settings, set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
In Beacon list settings, configure Beacon Detection as "All" and Beacon Record as "Eventual". This will detect all surrounding Beacons and create Beacon records every 30 seconds.

Beacon data parsing

Shown how Beacon data is represented on Wialon platform.

Parsing of Beacon records

Beacon records are sent as separate Records with Event I/O ID 385 and also include I/O element 385 (Codec8 Extended has to be used because the I/O element 385 uses Variable size IO element).

Received data in hexadecimal stream:
00000000000000D68E01000001701F9B3FA9000F0E5732209AB450006800290400000181000100000000000000000001018100A911214B5C049F515341

FCA950D2C264414E1000050006BA21E2C56DB5DFFB48D2B060D0F5A71096E000000000A92131A74BB76A79423196C916CFB9FAED45002D00159F0700112

233445566778899ABCDE0810047AE0BE80015210F86676BEC91420A94409110029AFAC415B31A0AA101DE9C18E92CA5AA689697365434663222BA21EBBB

DE835D7F4965B5F06C2EDCB3A55300010080A501736B79686F73742E646B000010000128AD01000030CB

Example Beacon Record


AVL Data Packet
AVL Data Packet Part		HEX Code Part
	Zero Bytes	00 00 00 00
	Data Field Length	00 00 00 D6
	Codec ID	8E (Codec8 Extended)
	Number of Data 1 (Number of Total Records)	01
AVL Data	Timestamp	00 00 01 70 1F 9B 3F A9 (GMT: Friday, 07 February 2020 12:23:53.001)
	Priority	00
	Longitude	0F 0E 57 32
	Latitude	20 9A B4 50
	Altitude	00 68
	Angle	00 29
	Satellites	04
	Speed	00 00
	Event IO ID	01 81 (385)
	N of Total ID	00 01
	N1 of One Byte IO	00 00
	N2 of Two Bytes IO	00 00
	N4 of Four Bytes IO	00 00
	N8 of Eight Bytes IO	00 00
	NX of X Bytes IO	00 01
	Length of Variable Length IO	00 A9
	Value of Variable Length IO	11214B5C049F515341FCA950D2C264414E1000050006BA21E2C56DB5 DFFB48D2B060D0F5A71096E000000000A92131A74BB76A79423196C916CFB9FAED45002D00159F0700112233445566778899ABCDE081004 7AE0BE80015210F86676BEC91420A94409110029AFAC415B31A0AA101DE9C18E92CA5AA689697365434663222BA21EBBBDE835D7F4965B5 F06C2EDCB3A55300010080A501736B79686F73742E646B000010000128AD
	Number of Data 2 (Number of Total Records)	01
	CRC-16	00 00 30 CB

Parsing Beacon data from record


Beacon data
Unparsed Beacon data
11214B5C049F515341FCA950D2C264414E1000050006BA21E2C56DB5 DFFB48D2B060D0F5A71096E000000000A92131A74BB76A79423196C916CFB9FAED45002D00159F0700112233445566778899ABCDE081004 7AE0BE80015210F86676BEC91420A94409110029AFAC415B31A0AA101DE9C18E92CA5AA689697365434663222BA21EBBBDE835D7F4965B5 F06C2EDCB3A55300010080A501736B79686F73742E646B000010000128AD

Beacon Flags

The below table represents possible Beacon flags. Supported Beacon protocols are iBeacon and Eddystone.


Flags
21	iBeacon with RSSI
23	iBeacon with RSSI, Battery Voltage
27	iBeacon with RSSi, Battery Voltage, Temperature
01	Eddystone with RSSI
03	Eddystone with RSSI, Battery Voltage
07	Eddystone with RSSi, Battery Voltage, Temperature


Parsed Beacon data
Parsed Beacon data part		HEX Code Part
	Data part (First half byte – current data part, Second half byte – total number of data parts)	11
	BLE beacon flags #1 21 - iBeacon, RSSI is sent	21
	BLE Beacon UUID #1	4B5C049F515341FCA950D2C264414E10
	BLE Beacon Major #1	0005
	BLE Beacon Minor #1	0006
	BLE Beacon RSSI #1	BA - Signed 2's Complement -70 dBm
	BLE beacon flags #2 21 - iBeacon, RSSI is sent	21
	BLE Beacon UUID #2	E2C56DB5DFFB48D2B060D0F5A71096E0
	BLE Beacon Major #2	0000
	BLE Beacon Minor #2	0000
	BLE Beacon RSSI #2	A9 - Signed 2's Complement -87 dBm
	BLE beacon flags #3 21 - iBeacon, RSSI is sent	21
	BLE Beacon UUID #3	31A74BB76A79423196C916CFB9FAED45
	BLE Beacon Major #3	002D
	BLE Beacon Minor #3	0015
	BLE Beacon RSSI #3	9F - Signed 2's Complement -97 dBm
	BLE beacon flags #4 07 - Eddystone, Battery Voltage, Temperature, RSSI is sent	07
	BLE Beacon Namespace #4	00112233445566778899
	BLE Beacon Instance ID #4	ABCDE0810047
	BLE Beacon RSSI #4	AE - Signed 2's Complement -82 dBm
	BLE Beacon Battery Voltage #4	0BE8 - 3048 mV
	BLE Beacon Temperature #4	0015 - 21°C
	BLE beacon flags #5 21 - iBeacon, RSSI is sent	21
	BLE Beacon UUID #5	0F86676BEC91420A94409110029AFAC4
	BLE Beacon Major #5	15B3
	BLE Beacon Minor #5	1A0A
	BLE Beacon RSSI #5	A1 - Signed 2's Complement -95 dBm
	BLE beacon flags #6 01 - Eddystone, RSSI is sent	01
	BLE Beacon Namespace #6	DE9C18E92CA5AA689697
	BLE Beacon Instance ID #6	365434663222
	BLE Beacon RSSI #6	BA - Signed 2's Complement -70 dBm
	BLE beacon flags #7 21 - iBeacon, RSSI is sent	21
	BLE Beacon UUID #7	EBBBDE835D7F4965B5F06C2EDCB3A553
	BLE Beacon Major #7	0001
	BLE Beacon Minor #7	0080
	BLE Beacon RSSI #7	A5 - Signed 2's Complement -91 dBm
	BLE beacon flags #8 01 - Eddystone, RSSI is sent	01
	BLE Beacon Namespace #8	736B79686F73742E646B
	BLE Beacon Instance ID #8	000010000128
	BLE Beacon RSSI #8	AD - Signed 2's Complement -83 dBm

@@ Line 2: / Line 2: @@
 ===Configuring BLE Sensor===
 [[Image:Screen beacon.png|right|frame]]
-Bluetooth®  BLE Sensor are disabled by default. <br>Configurations to these beacons are written through NFC.<br>
+Bluetooth  BLE Sensor are disabled by default. <br>Configurations to these beacons are written through NFC.<br>
 To do this download <b>[https://play.google.com/store/apps/details?id=com.ela.mobileapp.elamobileapp&hl=en_US| Device Manager Mobile]</b> by Ela from <i>Google Play Store</i> to your Android-powered device.<br>
 <b>Note!</b> Android-powered device that is used for configuring BLE sensors must support NFC read/write functionality.<br><br>
@@ Line 8: / Line 8: @@
 Follow these instructions to easily configure  BLE Sensor:
-*Enable <code>Bluetooth®</code> and <code>NFC</code> on your Android-powered device.
+*Enable <code>Bluetooth</code> and <code>NFC</code> on your Android-powered device.
 *Launch <b>Device Manager Mobile</b> on your Android-powered device.
 *Select <i>Configuration.</i>
@@ Line 62: / Line 62: @@
+In [[FMB120_Bluetooth_4.0_settings|Bluetooth 4.0]] settings, set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
-In [[FMB120_Bluetooth®_4.0_settings|Bluetooth® 4.0]] settings, set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
 [[File:Configurtaor2paint.jpg|alt=|frameless|533x533px]]
+====Steps to follow according to the visual represenation====
+#In [[FMB120_Bluetooth_settings|Bluetooth]] settings Enable Bluetooth, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth will be disabled;
-In the discover BLE find the sensor you need:
+#In [[FMB120_Bluetooth_4.0_settings|Bluetooth 4.0]] settings, set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
+#In [[FMB120_Beacon_List|Beacon list]] settings, configure Beacon Detection as "All" and Beacon Record as "Eventual". This will detect all surrounding Beacons and create Beacon records every 30 seconds.
-[[File:Dut-e-s7 configurator4.png|alt=|frameless|533x533px]]
-Fill the MAC address in the field:
-[[File:Dut-e-s7 configurator5.png|alt=|frameless|533x533px]]
-Configure the terminal for the data transfer from the fuel level sensor:
-[[File:Dut-e-s7 configurator8.png|alt=|frameless|537x537px]]
-The sensor settings are similar; you only need to change the MAC address.
-=== '''Sensor and FM device mounting position in car:''' ===
-[[File:Ela mounting recommendations 1.1 (1).png|frameless|886x886px]]
 ===Beacon data parsing===
-Shown how Beacon data is represented on [[Wialon_with_Fleet_Management_(FM)|Wialon platform]].
+Shown how Beacon data is represented on [[Gurtam_Wialon_with_Fleet_Management_(FM)|Wialon platform]].

Namespaces

Variants

Views

More

Search

Difference between revisions of "How to start with FMB devices and Sensors?"

Revision as of 11:25, 31 December 2020

Contents

Configuring BLE Sensor

Sensor Configuration and data sending

Steps to follow according to the visual represenation

Beacon data parsing

Parsing of Beacon records

Example Beacon Record

Parsing Beacon data from record

Beacon Flags

Navigation menu

Personal tools

NAVIGATION

Tools

Categories