Difference between revisions of "How to set up Eco Driving in Wialon app"

From Wiki Knowledge Base | Teltonika GPS
(Created page with "'''How to set up Eco Driving in Wialon app.''' To configure the Eco Driving Wialon application, you need to create Unit sensors. To do this, go to the Unit properties. Fil...")
(28 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
== How to set up Eco Driving in Wialon app ==
+
'''How to set up Eco Driving in Wialon app.'''
  
−
=== Solution applies for these FM devices ===
 
−
This solution is suitable for all devices of the FMB, FMC, FMM, FMU lines.
 
  
−
=== Eco Driving setting in the configurator ===
 
−
Please note that the functionality is available from firmware '''Ver.03.27.XX'''.
 
−
 
−
Enable parameter 258 (Eco Driving Maximum) in the configurator.
 
−
[[File:Eco Driving Wialon 15.png|none|thumb|427x427px]]
 
−
 
−
=== Creation of Unit sensors ===
 
 
To configure the Eco Driving Wialon application, you need to create Unit sensors. To do this, go to the Unit properties.
 
To configure the Eco Driving Wialon application, you need to create Unit sensors. To do this, go to the Unit properties.
 
[[File:Eco Driving Wialon 1.png|none|thumb|442x442px]]
 
[[File:Eco Driving Wialon 1.png|none|thumb|442x442px]]
Line 16: Line 7:
  
 
Select the sensors tab and select the "New" function.
 
Select the sensors tab and select the "New" function.
−
[[File:Eco Driving Wialon 2.png|none|thumb|550x550px]]
+
[[File:Eco Driving Wialon 2.png|none|thumb|415x415px]]
  
  
−
Create a sensor based on the '''io_258''' parameter.
+
Create a sensor based on the '''io_258''' parameter:
  
−
==== Accel_MAX ====
+
'''Accel_MAX''' sensor formula:
−
'''Accel_MAX''' sensor formula:<blockquote>(((io_258:48*const32768)-
 
  
−
(io_258:33*const1+io_258:34*const2+io_258:35*const4+io_258:36*const8+io_258:37*const16+i
+
(((io_258:48*const32768)-(io_258:33*const1+io_258:34*const2+io_258:35*const4+io_258:36*const8+io_258:37*const16+io_258:38*const32+io_258:39*const64+io_258:40*const128+io_258:41*const256+io_258:42*const512+io_258:43*const1024+io_258:44*const2048+io_258:45*const4096+io_258:46*const8192+io_258:47*const16384))*io_258:48)/const1000
 +
[[File:Eco Driving Wialon 3.png|none|thumb|415x415px]]
  
−
o_258:38*const32+io_258:39*const64+io_258:40*const128+io_258:41*const256+io_258:42*cons
 
  
−
t512+io_258:43*const1024+io_258:44*const2048+io_258:45*const4096+io_258:46*const8192+io
+
The same for the '''Brk_MAX''' sensor:
  
−
_258:47*const16384))*io_258:48)/const1000</blockquote>[[File:Eco Driving Wialon 3.png|none|thumb|550x550px]]
+
((-(io_258:33*const1+io_258:34*const2+io_258:35*const4+io_258:36*const8+io_258:37*const16+io_258:38*const32+io_258:39*const64+io_258:40*const128+io_258:41*const256+io_258:42*const512+io_258:43*const1024+io_258:44*const2048+io_258:45*const4096+io_258:46*const8192+io_258:47*const16384))*(io_258:48-const1))/const1000
 +
[[File:Eco Driving Wialon 4.png|none|thumb|415x415px]]
  
−
==== Brk_MAX  ====
 
−
'''Brk_MAX''' sensor formula:<blockquote>((-
 
  
−
(io_258:33*const1+io_258:34*const2+io_258:35*const4+io_258:36*const8+io_258:37*const16+i
+
And for the '''Crn_MAX''' sensor:
  
−
o_258:38*const32+io_258:39*const64+io_258:40*const128+io_258:41*const256+io_258:42*cons
+
(-(io_258:17*const1+io_258:18*const2+io_258:19*const4+io_258:20*const8+io_258:21*const16+io_258:22*const32+io_258:23*const64+io_258:24*const128+io_258:25*const256+io_258:26*const512+io_258:27*const1024+io_258:28*const2048+io_258:29*const4096+io_258:30*const8192+io_258:31*const16384))*(io_258:32-const1))/const1000+(((io_258:32*const32768)-(io_258:17*const1+io_258:18*const2+io_258:19*const4+io_258:20*const8+io_258:21*const16+io_258:22*const32+io_258:23*const64+io_258:24*const128+io_258:25*const256+io_258:26*const512+io_258:27*const1024+io_258:28*const2048+io_258:29*const4096+io_258:30*const8192+io_258:31*const16384))*io_258:32)/const1000
 +
[[File:Eco Driving Wialon 5.png|none|thumb|415x415px]]
  
−
t512+io_258:43*const1024+io_258:44*const2048+io_258:45*const4096+io_258:46*const8192+io
 
  
−
_258:47*const16384))*(io_258:48-const1))/const1000</blockquote>[[File:Eco Driving Wialon 4.png|none|thumb|550x550px]]
+
After creating the sensors, go to the Eco Driving tab and add new criterion for each of the sensors. Set the values ​​according to the screenshots:
 +
[[File:Eco Driving Wialon 6.png|none|thumb|415x415px]]
  
−
==== Crn_MAX ====
 
−
'''Crn_MAX''' sensor formula:<blockquote>(-
 
  
−
(io_258:17*const1+io_258:18*const2+io_258:19*const4+io_258:20*const8+io_258:21*const16+i
+
'''Acceleration''':
 +
[[File:Eco Driving Wialon 7.png|none|thumb|415x415px]]
  
−
o_258:22*const32+io_258:23*const64+io_258:24*const128+io_258:25*const256+io_258:26*cons
 
  
−
t512+io_258:27*const1024+io_258:28*const2048+io_258:29*const4096+io_258:30*const8192+io
+
'''Braking''':
 +
[[File:Eco Driving Wialon 8.png|none|thumb|415x415px]]
  
−
_258:31*const16384))*(io_258:32-const1))/const1000+(((io_258:32*const32768)-
 
  
−
(io_258:17*const1+io_258:18*const2+io_258:19*const4+io_258:20*const8+io_258:21*const16+i
+
'''Cornering''':
 +
[[File:Eco Driving Wialon 9.png|none|thumb|415x415px]]
  
−
o_258:22*const32+io_258:23*const64+io_258:24*const128+io_258:25*const256+io_258:26*cons
 
  
−
t512+io_258:27*const1024+io_258:28*const2048+io_258:29*const4096+io_258:30*const8192+io
+
'''Please note that «Calculate acceleration by: Eco Driving parameters» must be selected to calculate Eco Driving for io_258.'''
 +
[[File:Eco Driving Wialon 10.png|none|thumb|415x415px]]
  
−
_258:31*const16384))*io_258:32)/const1000</blockquote>[[File:Eco Driving Wialon 5.png|none|thumb|500x500px]]
 
  
−
=== Adding new criterion ===
+
After completing the setup, take a test drive and view the results in the Eco Driving app:
−
After creating the sensors, go to the Eco Driving tab and add new criterion for each of the sensors. Set the values ​​according to the screenshots:
+
[[File:Eco Driving Wialon 11.png|left|thumb|415x415px]]
−
[[File:Eco Driving Wialon 6.png|none|thumb|550x550px]]
 
−
 
 
−
==== Acceleration ====
 
−
[[File:Eco Driving Wialon 7.png|none|thumb|550x550px]]
 
−
 
 
−
==== Braking ====
 
−
[[File:Eco Driving Wialon 8.png|none|thumb|550x550px]]
 
−
 
 
−
==== Cornering ====
 
−
[[File:Eco Driving Wialon 9.png|none|thumb|550x550px]]
 
−
 
 
−
=== Calculation ===
 
−
'''Please note that «Calculate acceleration by: Eco Driving parameters» must be selected to calculate Eco Driving for io_258.'''
 
−
[[File:Eco Driving Wialon 10.png|none|thumb|550x550px|alt=]]
 
  
−
=== Eco Driving app ===
 
−
After completing the setup, take a test drive and view the results in the Eco Driving app:
 
−
[[File:Eco Driving Wialon 11.png|thumb|550x550px|alt=|none]]
 
  
−
''Apps -> Eco Driving''
 
  
−
[[File:Eco_Driving_Wialon_12.png|alt=|frameless|375x375px]]
+
[[File:Eco Driving Wialon 12.png|none|thumb]]
  
−
=== Driving quality in the EcoDriving app ===
 
−
View the driver's quality in the app:
 
−
[[File:Eco Driving Wialon 14.png|thumb|550x550px|alt=|left]]
 
  
−
[[Category: Frequently Asked Questions - FAQ]]
+
Now you can view the driver's driving quality in the app.

Revision as of 13:13, 15 April 2021

Main Page > Frequently Asked Questions - FAQ > How to set up Eco Driving in Wialon app

How to set up Eco Driving in Wialon app.


To configure the Eco Driving Wialon application, you need to create Unit sensors. To do this, go to the Unit properties.

Eco Driving Wialon 1.png


Select the sensors tab and select the "New" function.

Eco Driving Wialon 2.png


Create a sensor based on the io_258 parameter:

Accel_MAX sensor formula:

(((io_258:48*const32768)-(io_258:33*const1+io_258:34*const2+io_258:35*const4+io_258:36*const8+io_258:37*const16+io_258:38*const32+io_258:39*const64+io_258:40*const128+io_258:41*const256+io_258:42*const512+io_258:43*const1024+io_258:44*const2048+io_258:45*const4096+io_258:46*const8192+io_258:47*const16384))*io_258:48)/const1000

Eco Driving Wialon 3.png


The same for the Brk_MAX sensor:

((-(io_258:33*const1+io_258:34*const2+io_258:35*const4+io_258:36*const8+io_258:37*const16+io_258:38*const32+io_258:39*const64+io_258:40*const128+io_258:41*const256+io_258:42*const512+io_258:43*const1024+io_258:44*const2048+io_258:45*const4096+io_258:46*const8192+io_258:47*const16384))*(io_258:48-const1))/const1000

Eco Driving Wialon 4.png


And for the Crn_MAX sensor:

(-(io_258:17*const1+io_258:18*const2+io_258:19*const4+io_258:20*const8+io_258:21*const16+io_258:22*const32+io_258:23*const64+io_258:24*const128+io_258:25*const256+io_258:26*const512+io_258:27*const1024+io_258:28*const2048+io_258:29*const4096+io_258:30*const8192+io_258:31*const16384))*(io_258:32-const1))/const1000+(((io_258:32*const32768)-(io_258:17*const1+io_258:18*const2+io_258:19*const4+io_258:20*const8+io_258:21*const16+io_258:22*const32+io_258:23*const64+io_258:24*const128+io_258:25*const256+io_258:26*const512+io_258:27*const1024+io_258:28*const2048+io_258:29*const4096+io_258:30*const8192+io_258:31*const16384))*io_258:32)/const1000

Eco Driving Wialon 5.png


After creating the sensors, go to the Eco Driving tab and add new criterion for each of the sensors. Set the values ​​according to the screenshots:

Eco Driving Wialon 6.png


Acceleration:

Eco Driving Wialon 7.png


Braking:

Eco Driving Wialon 8.png


Cornering:

Eco Driving Wialon 9.png


Please note that «Calculate acceleration by: Eco Driving parameters» must be selected to calculate Eco Driving for io_258.

Eco Driving Wialon 10.png


After completing the setup, take a test drive and view the results in the Eco Driving app:

Eco Driving Wialon 11.png


Eco Driving Wialon 12.png


Now you can view the driver's driving quality in the app.

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=How_to_set_up_Eco_Driving_in_Wialon_app&oldid=64491"