Difference between revisions of "How to start with FMB devices and Beacons?"

From Wiki Knowledge Base | Teltonika GPS
m (Text replacement - "Bluetooth(?!®)" to "Bluetooth®")
 
(4 intermediate revisions by 3 users not shown)
Line 3: Line 3:
  
 
== Eye Devices ready to use ==
 
== Eye Devices ready to use ==
−
The easiest way to use the Teltonika's Eye Devices is as fast as unbox them.
+
The easiest way to get started with beacons is to use the Teltonika's Eye Devices. All you need to do is just unbox them.
  
−
[[EYE BEACON / BTSID1|Eye Beacons]] are designed to make your wireless experience much more easy than ever because there is not need to make a previous configuration, the device has a pre-charged config from factory, this ensures a good operation.
+
[[EYE BEACON / BTSID1|Eye Beacons]] are designed to make your wireless experience effortless, there is not need to make adjustments configuration, the devices are pre-configured and ON from factory, this ensures rapid deployment.
 +
 
 +
 
 +
Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:
 +
 
 +
• Transmitting at 2 dBm power.
 +
 
 +
• Data advertising at 5 second intervals.
 +
 
 +
• Eddystone(for EYE Beacon) Eddystone and Sensors(for EYE Sensor) protocol
 +
[[File:BTSMP1 wiki.jpg|center|frameless|401x401px]]
 +
 
 +
 
 +
 
 +
You can find detailed information about how to configure those  parameters below:
  
 
==Beacon Configuration and data sending==
 
==Beacon Configuration and data sending==
  
 
=== EYE APP Overview ===
 
=== EYE APP Overview ===
−
Eye sensors are ready to use from factory, however, you can change Your beacon parameters according to your needs. Eye App is Teltonika dedicated application for Eye sensor/beacon confguration.
+
Eye sensors are ready to use from factory, however, you can change your beacon parameters according to your needs. Eye App is Teltonika dedicated application for Eye sensor/beacon configuration.
  
 
[[File:EYEAPPBTSID.png|center|thumb|1024x1024px]]
 
[[File:EYEAPPBTSID.png|center|thumb|1024x1024px]]
Line 28: Line 42:
  
 
#In System Settings Enable [[Codec#Codec_8_Extended|Codec8 Extended]];
 
#In System Settings Enable [[Codec#Codec_8_Extended|Codec8 Extended]];
−
#In [[FMB120_Bluetooth_settings|Bluetooth]] settings Enable Bluetooth, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth will be disabled;
+
#In [[FMB120_Bluetooth®_settings|Bluetooth®]] settings Enable Bluetooth®, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth® will be disabled;
−
#In [[FMB120_Bluetooth_4.0_settings|Bluetooth 4.0]] settings, set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
+
#In [[FMB120_Bluetooth®_4.0_settings|Bluetooth® 4.0]] settings, set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
 
#In [[FMB120_Beacon_List|Beacon list]] settings, configure Beacon Detection as "All" and Beacon Record as "Eventual". This will detect all surrounding Beacons and create Beacon records every 30 seconds.
 
#In [[FMB120_Beacon_List|Beacon list]] settings, configure Beacon Detection as "All" and Beacon Record as "Eventual". This will detect all surrounding Beacons and create Beacon records every 30 seconds.
  
 
===Beacon data parsing===
 
===Beacon data parsing===
  
−
Shown how Beacon data is represented on [[Gurtam_Wialon_with_Fleet_Management_(FM)|Wialon platform]].  
+
Shown how Beacon data is represented on [[Wialon_with_Fleet_Management_(FM)|Wialon platform]].  
  
  

Latest revision as of 15:29, 28 December 2023

Main Page > Frequently Asked Questions - FAQ > How to start with FMB devices and Beacons?
EYE Beacon BTSID

Eye Devices ready to use

The easiest way to get started with beacons is to use the Teltonika's Eye Devices. All you need to do is just unbox them.

Eye Beacons are designed to make your wireless experience effortless, there is not need to make adjustments configuration, the devices are pre-configured and ON from factory, this ensures rapid deployment.


Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:

• Transmitting at 2 dBm power.

• Data advertising at 5 second intervals.

• Eddystone(for EYE Beacon) Eddystone and Sensors(for EYE Sensor) protocol

BTSMP1 wiki.jpg


You can find detailed information about how to configure those parameters below:

Beacon Configuration and data sending

EYE APP Overview

Eye sensors are ready to use from factory, however, you can change your beacon parameters according to your needs. Eye App is Teltonika dedicated application for Eye sensor/beacon configuration.

EYEAPPBTSID.png
  1. Eye App first screen will show you available Eye Beacons/sensors reachable, press on you beacon to access next screen
  2. Eye App second screen shows ID information and Firmware information, press on the icon to access beacon parameters
  3. Eye App third screen allows you to change Beacon Name, TX power, Advertising interval, Packet settings.

Beacon configuration (Setting your tracking device for Beacon usage)

Below are short instructions which show how we recommend configuring the device to Enable the Beacon functionality for testing.


Beacon project V3.gif

Steps to follow according to the visual representation

  1. In System Settings Enable Codec8 Extended;
  2. In Bluetooth® settings Enable Bluetooth®, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth® will be disabled;
  3. In Bluetooth® 4.0 settings, set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
  4. In Beacon list settings, configure Beacon Detection as "All" and Beacon Record as "Eventual". This will detect all surrounding Beacons and create Beacon records every 30 seconds.

Beacon data parsing

Shown how Beacon data is represented on Wialon platform.


Wialon Project V3.gif


Parsing of Beacon records

Beacon records are sent as separate Records with Event I/O ID 385 and also include I/O element 385 (Codec8 Extended has to be used because the I/O element 385 uses Variable size IO element).

Received data in hexadecimal stream:
00000000000000D68E01000001701F9B3FA9000F0E5732209AB450006800290400000181000100000000000000000001018100A911214B5C049F515341

FCA950D2C264414E1000050006BA21E2C56DB5DFFB48D2B060D0F5A71096E000000000A92131A74BB76A79423196C916CFB9FAED45002D00159F0700112

233445566778899ABCDE0810047AE0BE80015210F86676BEC91420A94409110029AFAC415B31A0AA101DE9C18E92CA5AA689697365434663222BA21EBBB

DE835D7F4965B5F06C2EDCB3A55300010080A501736B79686F73742E646B000010000128AD01000030CB

Example Beacon Record

AVL Data Packet
AVL Data Packet Part HEX Code Part
Zero Bytes 00 00 00 00
Data Field Length 00 00 00 D6
Codec ID 8E (Codec8 Extended)
Number of Data 1 (Number of Total Records) 01
AVL Data Timestamp 00 00 01 70 1F 9B 3F A9 (GMT: Friday, 07 February 2020 12:23:53.001)
Priority 00
Longitude 0F 0E 57 32
Latitude 20 9A B4 50
Altitude 00 68
Angle 00 29
Satellites 04
Speed 00 00
Event IO ID 01 81 (385)
N of Total ID 00 01
N1 of One Byte IO 00 00
N2 of Two Bytes IO 00 00
N4 of Four Bytes IO 00 00
N8 of Eight Bytes IO 00 00
NX of X Bytes IO 00 01
N’th IO ID - AVL ID. 01 81 (385)
Length of Variable Length IO 00 A9
Value of Variable Length IO 11214B5C049F515341FCA950D2C264414E1000050006BA21E2C56DB5
DFFB48D2B060D0F5A71096E000000000A92131A74BB76A79423196C916CFB9FAED45002D00159F0700112233445566778899ABCDE081004
7AE0BE80015210F86676BEC91420A94409110029AFAC415B31A0AA101DE9C18E92CA5AA689697365434663222BA21EBBBDE835D7F4965B5
F06C2EDCB3A55300010080A501736B79686F73742E646B000010000128AD
Number of Data 2 (Number of Total Records) 01
CRC-16 00 00 30 CB

Parsing Beacon data from record


Beacon data
Unparsed Beacon data
11214B5C049F515341FCA950D2C264414E1000050006BA21E2C56DB5
DFFB48D2B060D0F5A71096E000000000A92131A74BB76A79423196C916CFB9FAED45002D00159F0700112233445566778899ABCDE081004
7AE0BE80015210F86676BEC91420A94409110029AFAC415B31A0AA101DE9C18E92CA5AA689697365434663222BA21EBBBDE835D7F4965B5
F06C2EDCB3A55300010080A501736B79686F73742E646B000010000128AD


Beacon Flags

The below table represents possible Beacon flags. Supported Beacon protocols are iBeacon and Eddystone.

Flags
21 iBeacon with RSSI
23 iBeacon with RSSI,

Battery Voltage

27 iBeacon with RSSi, Battery Voltage, Temperature
01 Eddystone with RSSI
03 Eddystone with RSSI, Battery Voltage
07 Eddystone with RSSi, Battery Voltage, Temperature

NOTE! Standard iBeacon protocol does not support Battery voltage or temperature sending.

Parsed Beacon data
Parsed Beacon data part HEX Code Part
Data part
(First half byte – current data part, Second half byte – total number of data parts) 		11
BLE beacon flags #1
21 - iBeacon, RSSI is sent 		21
BLE Beacon UUID #1 4B5C049F515341FCA950D2C264414E10
BLE Beacon Major #1 0005
BLE Beacon Minor #1 0006
BLE Beacon RSSI #1 BA - Signed 2's Complement -70 dBm
BLE beacon flags #2
21 - iBeacon, RSSI is sent 		21
BLE Beacon UUID #2 E2C56DB5DFFB48D2B060D0F5A71096E0
BLE Beacon Major #2 0000
BLE Beacon Minor #2 0000
BLE Beacon RSSI #2 A9 - Signed 2's Complement -87 dBm
BLE beacon flags #3
21 - iBeacon, RSSI is sent 		21
BLE Beacon UUID #3 31A74BB76A79423196C916CFB9FAED45
BLE Beacon Major #3 002D
BLE Beacon Minor #3 0015
BLE Beacon RSSI #3 9F - Signed 2's Complement -97 dBm
BLE beacon flags #4
07 - Eddystone, Battery Voltage, Temperature, RSSI is sent 		07
BLE Beacon Namespace #4 00112233445566778899
BLE Beacon Instance ID #4 ABCDE0810047
BLE Beacon RSSI #4 AE - Signed 2's Complement -82 dBm
BLE Beacon Battery Voltage #4 0BE8 - 3048 mV
BLE Beacon Temperature #4 0015 - 21°C
BLE beacon flags #5
21 - iBeacon, RSSI is sent 		21
BLE Beacon UUID #5 0F86676BEC91420A94409110029AFAC4
BLE Beacon Major #5 15B3
BLE Beacon Minor #5 1A0A
BLE Beacon RSSI #5 A1 - Signed 2's Complement -95 dBm
BLE beacon flags #6
01 - Eddystone, RSSI is sent 		01
BLE Beacon Namespace #6 DE9C18E92CA5AA689697
BLE Beacon Instance ID #6 365434663222
BLE Beacon RSSI #6 BA - Signed 2's Complement -70 dBm
BLE beacon flags #7
21 - iBeacon, RSSI is sent 		21
BLE Beacon UUID #7 EBBBDE835D7F4965B5F06C2EDCB3A553
BLE Beacon Major #7 0001
BLE Beacon Minor #7 0080
BLE Beacon RSSI #7 A5 - Signed 2's Complement -91 dBm
BLE beacon flags #8
01 - Eddystone, RSSI is sent 		01
BLE Beacon Namespace #8 736B79686F73742E646B
BLE Beacon Instance ID #8 000010000128
BLE Beacon RSSI #8 AD - Signed 2's Complement -83 dBm
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=How_to_start_with_FMB_devices_and_Beacons%3F&oldid=94434"