Difference between revisions of "How to capture remote log from FM device?"
(Added EOL devices to the device list) |
|||
(13 intermediate revisions by 5 users not shown) | |||
Line 1: | Line 1: | ||
− | ===Solution applies for these devices | + | __TOC__ |
− | [[FMA110]] [[FMA120]] [[FMA202]] [[FMA204]] [[FMB630]] [[ | + | ==Supported devices== |
+ | '''Solution applies for these devices:''' | ||
+ | <!-- [[FMA110]] [[FMA120]] [[FMA202]] [[FMA204]] [[FMB630]] [[FM6320]] [[FM6300]] [[FM3612]] [[FM3622]] [[FM36M1]] --> | ||
+ | * [[FMB630]]/[[FM6320]]/[[FM6300]] | ||
+ | * [[FMB640]] | ||
+ | * [[FMC640]] | ||
+ | * [[FMM640]] | ||
+ | * [[FMB641]] | ||
+ | * [[FMC650]] | ||
+ | * [[FMM650]] | ||
− | + | ==How does it work?== | |
+ | Fleet management devices online log capturing is initiated using command <code>log2srv</code> and by setting right configuration. The device establishes a GPRS connection and activates the link to the computer, log starts to stream to the computer until the set time is elapsed. To stop streaming log immediately <code>log2srvstop</code> is used. | ||
− | Here are steps how to capture online log from FM series devices: | + | ==Steps to collect log file== |
+ | Here are steps on how to capture an online log from FM series devices: | ||
# Make sure you have '''external IP address''' with '''opened TCP port'''. This could be checked [http://canyouseeme.org/ here]. | # Make sure you have '''external IP address''' with '''opened TCP port'''. This could be checked [http://canyouseeme.org/ here]. | ||
# Download "'''Hercules'''" program from [https://www.hw-group.com/software/hercules-setup-utility www.hw-group.com] and start it.<p><table class="wikitable" style="width: 100%;"><tr><td style="width: 50%; border: 1px solid white; background: white;">Go to '''(1) TCP Server''' → '''(2)''' Enter your '''opened TCP port''' → '''(3)''' Press '''Listen''' then click right mouse button over '''Received''' or '''Sent data''' window → '''(4)''' Go to '''Special Chars''' → '''(5)''' Set '''ASCII Names'''.</td><td style="width: 50%; border: 1px solid white; background: white;">Click right mouse button over '''Received''' or '''Sent data''' window → '''(1)''' Go to '''Log to File''' → '''(2)''' Set '''file name''' and '''directory''' where captured log will be saved → '''(3)''' Press '''Log Enable'''.</td></tr><tr><td style="width: 50%; border: 1px solid white; background: white;">[[Image:Hercule_listen_asci.png|400px|left]]</td><td style="width: 50%; border: 1px solid white; background: white;"> [[Image:Hercules_log_enable.png|500px|left]]</td></tr></table></p> | # Download "'''Hercules'''" program from [https://www.hw-group.com/software/hercules-setup-utility www.hw-group.com] and start it.<p><table class="wikitable" style="width: 100%;"><tr><td style="width: 50%; border: 1px solid white; background: white;">Go to '''(1) TCP Server''' → '''(2)''' Enter your '''opened TCP port''' → '''(3)''' Press '''Listen''' then click right mouse button over '''Received''' or '''Sent data''' window → '''(4)''' Go to '''Special Chars''' → '''(5)''' Set '''ASCII Names'''.</td><td style="width: 50%; border: 1px solid white; background: white;">Click right mouse button over '''Received''' or '''Sent data''' window → '''(1)''' Go to '''Log to File''' → '''(2)''' Set '''file name''' and '''directory''' where captured log will be saved → '''(3)''' Press '''Log Enable'''.</td></tr><tr><td style="width: 50%; border: 1px solid white; background: white;">[[Image:Hercule_listen_asci.png|400px|left]]</td><td style="width: 50%; border: 1px solid white; background: white;"> [[Image:Hercules_log_enable.png|500px|left]]</td></tr></table></p> | ||
# Make sure that FM device is '''turned on''' and not in '''Deep Sleep mode'''. | # Make sure that FM device is '''turned on''' and not in '''Deep Sleep mode'''. | ||
# Send following '''SMS command''' to FM device: | # Send following '''SMS command''' to FM device: | ||
− | #* If you have set SMS login and password: <code>login pass log2srv 1,3,'''APN''','''APNusername''','''APNpassword''','''IP''','''port''',1200, | + | #* If you have set SMS login and password: <code>login pass log2srv 1,3,'''APN''','''APNusername''','''APNpassword''','''IP''','''port''',1200,0</code><p>'''APN''' - Operator APN name of the SIM card, which is inserted into the device from which the log will be captured.</p><p>'''APNusername''' - Operator APN username of the SIM card, which is inserted into the device from which the log will be captured.</p><p>'''APNpassword''' - Operator APN password of the SIM card, which is inserted into the device from which the log will be captured.</p><p>'''IP''' - External IP address of the computer to which the device will connect.</p><p>'''port''' - Opened TCP port (used in '''Hercules''') of external ip address to which the device will connect.</p><p>Command example: <code>opa opa log2srv 1,3,banga,,,212.59.13.226,7056,1200,0</code></p> |
− | #* If SMS login and password are not set leave two spaces before command: <code><span style= | + | #* If SMS login and password are not set to leave two spaces before the command: <code><span style="color:#f8f9fa">aa</span>log2srv 1,3,'''APN''','''APNusername''','''APNpassword''','''IP''','''port''',1200,0</code><p>If command was sent correctly you should receive SMS Response:<code>LOG2SRV OK=1, 3, IP, port, 1200, 0</code></p><p>[[File:Alert.png|50px|left|link=]]<b>Up to 5 minutes delay could appear if wrong <code>log2srv</code> commands settings will be sent, during that time no SMS or GPRS command could be received. SMS will be hanging, after timeout, hanging SMS’s will be proceeded.</b></p> |
− | "color:#f8f9fa">aa</span>log2srv 1,3,'''APN''','''APNusername''','''APNpassword''','''IP''','''port''',1200, | + | # After successful '''SMS response''' device will start streaming log to '''Hercules''' program. '''(1)''' Logfile bytes will start increasing and '''(2)''' connected device will appear. Device log will be captured for '''20 minutes'''.<p>[[File:Hercules_connected.png|400px]]</p><p>If you want to stop log capturing immediately send following '''SMS command''' to FM device:</p> |
− | # After successful '''SMS response''' device will start streaming log to '''Hercules''' program. '''(1)''' Logfile bytes will start increasing and '''(2)''' connected device will appear. Device log will be captured for ''' | ||
#* If you have set SMS login and password: <code>login pass log2srvstop</code> | #* If you have set SMS login and password: <code>login pass log2srvstop</code> | ||
− | #* If SMS login and password are not set leave two spaces before command: <code><span style= | + | #* If SMS login and password are not set to leave two spaces before the command: <code><span style="color:#f8f9fa">aa</span>log2srvstop</code> |
− | "color:#f8f9fa">aa</span>log2srvstop</code> | + | # Provide captured log to your '''Teltonika Sales Manager''' or '''Teltonika Support team''' for further investigation. |
− | # Provide captured log to your '''Teltonika Sales | + | |
+ | [[Category: Frequently Asked Questions - FAQ]] |
Latest revision as of 17:40, 23 May 2023
Main Page > Frequently Asked Questions - FAQ > How to capture remote log from FM device?Supported devices
Solution applies for these devices:
How does it work?
Fleet management devices online log capturing is initiated using command log2srv
and by setting right configuration. The device establishes a GPRS connection and activates the link to the computer, log starts to stream to the computer until the set time is elapsed. To stop streaming log immediately log2srvstop
is used.
Steps to collect log file
Here are steps on how to capture an online log from FM series devices:
- Make sure you have external IP address with opened TCP port. This could be checked here.
- Download "Hercules" program from www.hw-group.com and start it.
Go to (1) TCP Server → (2) Enter your opened TCP port → (3) Press Listen then click right mouse button over Received or Sent data window → (4) Go to Special Chars → (5) Set ASCII Names. Click right mouse button over Received or Sent data window → (1) Go to Log to File → (2) Set file name and directory where captured log will be saved → (3) Press Log Enable. - Make sure that FM device is turned on and not in Deep Sleep mode.
- Send following SMS command to FM device:
- If you have set SMS login and password:
login pass log2srv 1,3,APN,APNusername,APNpassword,IP,port,1200,0
APN - Operator APN name of the SIM card, which is inserted into the device from which the log will be captured.
APNusername - Operator APN username of the SIM card, which is inserted into the device from which the log will be captured.
APNpassword - Operator APN password of the SIM card, which is inserted into the device from which the log will be captured.
IP - External IP address of the computer to which the device will connect.
port - Opened TCP port (used in Hercules) of external ip address to which the device will connect.
Command example:
opa opa log2srv 1,3,banga,,,212.59.13.226,7056,1200,0
- If SMS login and password are not set to leave two spaces before the command:
aalog2srv 1,3,APN,APNusername,APNpassword,IP,port,1200,0
If command was sent correctly you should receive SMS Response:
LOG2SRV OK=1, 3, IP, port, 1200, 0
Up to 5 minutes delay could appear if wronglog2srv
commands settings will be sent, during that time no SMS or GPRS command could be received. SMS will be hanging, after timeout, hanging SMS’s will be proceeded.
- If you have set SMS login and password:
- After successful SMS response device will start streaming log to Hercules program. (1) Logfile bytes will start increasing and (2) connected device will appear. Device log will be captured for 20 minutes.
If you want to stop log capturing immediately send following SMS command to FM device:
- If you have set SMS login and password:
login pass log2srvstop
- If SMS login and password are not set to leave two spaces before the command:
aalog2srvstop
- If you have set SMS login and password:
- Provide captured log to your Teltonika Sales Manager or Teltonika Support team for further investigation.