Difference between revisions of "How to capture remote log from FM device?"

From Wiki Knowledge Base | Teltonika GPS
Line 17: Line 17:
 
"color:#f8f9fa">aa</span>log2srvstop</code>
 
"color:#f8f9fa">aa</span>log2srvstop</code>
 
# Provide captured log to your '''Teltonika Sales manager''' or '''Teltonika Support team''' for further investigation.
 
# Provide captured log to your '''Teltonika Sales manager''' or '''Teltonika Support team''' for further investigation.
 
[[Category:Fleet Management FAQ]]
 

Revision as of 13:29, 19 June 2019

Main Page > Frequently Asked Questions - FAQ > How to capture remote log from FM device?

Solution applies for these devices

FMA110 FMA120 FMA202 FMA204 FMB630 FMB640 FM6320 FM6300 FM3612 FM3622 FM36M1

FM devices online log capturing is initiated using command log2srv and by setting right configuration. Device establishes GPRS connection and activates link to computer, log starts to stream to computer until set time is elapsed. To stop streaming log immediately log2srvstop is used.

Here are steps how to capture online log from FM series devices:

  1. Make sure you have external IP address with opened TCP port. This could be checked here.
  2. Download "Hercules" program from www.hw-group.com and start it.

    Go to (1) TCP Server(2) Enter your opened TCP port(3) Press Listen then click right mouse button over Received or Sent data window → (4) Go to Special Chars(5) Set ASCII Names.Click right mouse button over Received or Sent data window → (1) Go to Log to File(2) Set file name and directory where captured log will be saved → (3) Press Log Enable.
    Hercule listen asci.png
    Hercules log enable.png

  3. Make sure that FM device is turned on and not in Deep Sleep mode.
  4. Send following SMS command to FM device:
    • If you have set SMS login and password: login pass log2srv 1,3,APN,APNusername,APNpassword,IP,port,1200,0”

      APN - Operator APN name of the SIM card, which is inserted into the device from which the log will be captured.

      APNusername - Operator APN username of the SIM card, which is inserted into the device from which the log will be captured.

      APNpassword - Operator APN password of the SIM card, which is inserted into the device from which the log will be captured.

      IP - External IP address of the computer to which the device will connect.

      port - Opened TCP port (used in Hercules) of external ip address to which the device will connect.

      Command example: opa opa log2srv 1,3,banga,,,212.59.13.226,7056,1200,0

    • If SMS login and password are not set leave two spaces before command: aalog2srv 1,3,APN,APNusername,APNpassword,IP,port,1200,0”

      If command was sent correctly you should receive SMS Response:LOG2SRV OK=1, 3, IP, port, 1200, 0

      Alert.png
      Up to 5 minutes delay could appear if wrong log2srv commands settings will be sent, during that time no SMS or GPRS command could be received. SMS will be hanging, after timeout, hanging SMS’s will be proceeded.

  5. After successful SMS response device will start streaming log to Hercules program. (1) Logfile bytes will start increasing and (2) connected device will appear. Device log will be captured for 20 minutes.

    Hercules connected.png

    If you want to stop log capturing immediately send following SMS command to FM device:

    • If you have set SMS login and password: login pass log2srvstop
    • If SMS login and password are not set leave two spaces before command: aalog2srvstop
  6. Provide captured log to your Teltonika Sales manager or Teltonika Support team for further investigation.