How to add a BLE preset to the configurator
How to add a BLE preset to the configurator (Bluetooth® 4.0 tab).
Solution applies for these FM devices
FMB003 FMB900 FMB910 FMB920 FMB110 FMB120 FMB122 FMB125 FMB202 FMB204 FMB962 FMB964 FMT100 FMM125 FMM130 FMU125 FMU130 FMC125 FMC130 FMC640 FMM640 FMP100
Disclaimer
![Alert.png](/images/d/d6/Alert.png)
If you are not using Bluetooth®, please consider turning it off or change Bluetooth® PIN to remove potential risks.
If you are using Bluetooth® we strongly recommend using AES encryption for enhanced security.
About presets
Presets - PREpared SETtings for decoding Bluetooth® equipment data (Temperature Sensors, Humidity Sensors, Motion Sensors, Fuel Level Sensors, etc.).
Basic list of presets
You can find a basic list of presets here:
Device settings => Bluetooth® 4.0 tab => Connection number => Advanced mode => Preset selection.
Adding presets
You can add presets (XML format) to the configurator (Bluetooth® 4.0 tab) if your BLE equipment is not supported by the standard set of presets.
All saved presets are located here: C:\Users\<user>\Documents\Presets
A prepared preset must be added to the main list:
It is enough to reopen the presets window to see the updated list:
Deleting presets
You can delete a preset, in which case it will be deleted from the general list:
Saving your own preset
You can also save your own settings to a new preset. To do this, use the "Preset save" button and enter the name. In this case you can find your preset in the general list:
You can also find the XML version of the preset here: C:\Users\<user>\Documents\Presets