How to start with FMB devices and Sensors?
Configuring BLE Sensor
Bluetooth BLE Sensor are disabled by default.
Configurations to these beacons are written through NFC.
To do this download Device Manager Mobile by Ela from Google Play Store to your Android-powered device.
Note! Android-powered device that is used for configuring BLE sensors must support NFC read/write functionality.
Follow these instructions to easily configure BLE Sensor:
- Enable
Bluetooth
andNFC
on your Android-powered device. - Launch Device Manager Mobile on your Android-powered device.
- Select Configuration.
- Place your Android-powered device on top of BLE Sensors to scan it.
- Click Enable to allow BLE Sensors transmit advertising data.
- We recommend to set Power to 4 to get the best possible distance.
- Set TAG Format to Sensor.
- Set BLE Emit Period to 1 second to get the best possible sensor detection.
- Click Write button.
- Place your Android-powered device on top of BLE sensor to write configuration to it.
Once the configuration is written successfully, the BLE Sensor will be enabled and use the settings configured in the APP.
Note! Make sure that Manufacturer data mode is Disabled, otherwise Sensor will not be detected without additional changes in configuration.
Sensor Configuration and data sending
Open FM device configurator.
In System Settings Enable Codec8 Extended;
In Bluetooth 4.0 settings, set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
Fill the MAC address in the field:
Beacon data parsing
Shown how Beacon data is represented on Wialon platform.
Parsing of Beacon records
Beacon records are sent as separate Records with Event I/O ID 385 and also include I/O element 385 (Codec8 Extended has to be used because the I/O element 385 uses Variable size IO element).
Received data in hexadecimal stream:
00000000000000D68E01000001701F9B3FA9000F0E5732209AB450006800290400000181000100000000000000000001018100A911214B5C049F515341
FCA950D2C264414E1000050006BA21E2C56DB5DFFB48D2B060D0F5A71096E000000000A92131A74BB76A79423196C916CFB9FAED45002D00159F0700112
233445566778899ABCDE0810047AE0BE80015210F86676BEC91420A94409110029AFAC415B31A0AA101DE9C18E92CA5AA689697365434663222BA21EBBB
DE835D7F4965B5F06C2EDCB3A55300010080A501736B79686F73742E646B000010000128AD01000030CB
Example Beacon Record
AVL Data Packet | ||
---|---|---|
AVL Data Packet Part | HEX Code Part | |
Zero Bytes | 00 00 00 00 | |
Data Field Length | 00 00 00 D6 | |
Codec ID | 8E (Codec8 Extended) | |
Number of Data 1 (Number of Total Records) | 01 | |
AVL Data | Timestamp | 00 00 01 70 1F 9B 3F A9 (GMT: Friday, 07 February 2020 12:23:53.001) |
Priority | 00 | |
Longitude | 0F 0E 57 32 | |
Latitude | 20 9A B4 50 | |
Altitude | 00 68 | |
Angle | 00 29 | |
Satellites | 04 | |
Speed | 00 00 | |
Event IO ID | 01 81 (385) | |
N of Total ID | 00 01 | |
N1 of One Byte IO | 00 00 | |
N2 of Two Bytes IO | 00 00 | |
N4 of Four Bytes IO | 00 00 | |
N8 of Eight Bytes IO | 00 00 | |
NX of X Bytes IO | 00 01 | |
Length of Variable Length IO | 00 A9 | |
Value of Variable Length IO | 11214B5C049F515341FCA950D2C264414E1000050006BA21E2C56DB5 DFFB48D2B060D0F5A71096E000000000A92131A74BB76A79423196C916CFB9FAED45002D00159F0700112233445566778899ABCDE081004 7AE0BE80015210F86676BEC91420A94409110029AFAC415B31A0AA101DE9C18E92CA5AA689697365434663222BA21EBBBDE835D7F4965B5 F06C2EDCB3A55300010080A501736B79686F73742E646B000010000128AD | |
Number of Data 2 (Number of Total Records) | 01 | |
CRC-16 | 00 00 30 CB |
Parsing Beacon data from record
Beacon data | ||
---|---|---|
Unparsed Beacon data | ||
11214B5C049F515341FCA950D2C264414E1000050006BA21E2C56DB5 DFFB48D2B060D0F5A71096E000000000A92131A74BB76A79423196C916CFB9FAED45002D00159F0700112233445566778899ABCDE081004 7AE0BE80015210F86676BEC91420A94409110029AFAC415B31A0AA101DE9C18E92CA5AA689697365434663222BA21EBBBDE835D7F4965B5 F06C2EDCB3A55300010080A501736B79686F73742E646B000010000128AD |
Beacon Flags
The below table represents possible Beacon flags. Supported Beacon protocols are iBeacon and Eddystone.
Flags | |
---|---|
21 | iBeacon with RSSI |
23 | iBeacon with RSSI, Battery Voltage |
27 | iBeacon with RSSi, Battery Voltage, Temperature |
01 | Eddystone with RSSI |
03 | Eddystone with RSSI, Battery Voltage |
07 | Eddystone with RSSi, Battery Voltage, Temperature |
Parsed Beacon data | ||
---|---|---|
Parsed Beacon data part | HEX Code Part | |
Data part (First half byte – current data part, Second half byte – total number of data parts) |
11 | |
BLE beacon flags #1 21 - iBeacon, RSSI is sent |
21 | |
BLE Beacon UUID #1 | 4B5C049F515341FCA950D2C264414E10 | |
BLE Beacon Major #1 | 0005 | |
BLE Beacon Minor #1 | 0006 | |
BLE Beacon RSSI #1 | BA - Signed 2's Complement -70 dBm | |
BLE beacon flags #2 21 - iBeacon, RSSI is sent |
21 | |
BLE Beacon UUID #2 | E2C56DB5DFFB48D2B060D0F5A71096E0 | |
BLE Beacon Major #2 | 0000 | |
BLE Beacon Minor #2 | 0000 | |
BLE Beacon RSSI #2 | A9 - Signed 2's Complement -87 dBm | |
BLE beacon flags #3 21 - iBeacon, RSSI is sent |
21 | |
BLE Beacon UUID #3 | 31A74BB76A79423196C916CFB9FAED45 | |
BLE Beacon Major #3 | 002D | |
BLE Beacon Minor #3 | 0015 | |
BLE Beacon RSSI #3 | 9F - Signed 2's Complement -97 dBm | |
BLE beacon flags #4 07 - Eddystone, Battery Voltage, Temperature, RSSI is sent |
07 | |
BLE Beacon Namespace #4 | 00112233445566778899 | |
BLE Beacon Instance ID #4 | ABCDE0810047 | |
BLE Beacon RSSI #4 | AE - Signed 2's Complement -82 dBm | |
BLE Beacon Battery Voltage #4 | 0BE8 - 3048 mV | |
BLE Beacon Temperature #4 | 0015 - 21°C | |
BLE beacon flags #5 21 - iBeacon, RSSI is sent |
21 | |
BLE Beacon UUID #5 | 0F86676BEC91420A94409110029AFAC4 | |
BLE Beacon Major #5 | 15B3 | |
BLE Beacon Minor #5 | 1A0A | |
BLE Beacon RSSI #5 | A1 - Signed 2's Complement -95 dBm | |
BLE beacon flags #6 01 - Eddystone, RSSI is sent |
01 | |
BLE Beacon Namespace #6 | DE9C18E92CA5AA689697 | |
BLE Beacon Instance ID #6 | 365434663222 | |
BLE Beacon RSSI #6 | BA - Signed 2's Complement -70 dBm | |
BLE beacon flags #7 21 - iBeacon, RSSI is sent |
21 | |
BLE Beacon UUID #7 | EBBBDE835D7F4965B5F06C2EDCB3A553 | |
BLE Beacon Major #7 | 0001 | |
BLE Beacon Minor #7 | 0080 | |
BLE Beacon RSSI #7 | A5 - Signed 2's Complement -91 dBm | |
BLE beacon flags #8 01 - Eddystone, RSSI is sent |
01 | |
BLE Beacon Namespace #8 | 736B79686F73742E646B | |
BLE Beacon Instance ID #8 | 000010000128 | |
BLE Beacon RSSI #8 | AD - Signed 2's Complement -83 dBm |