Troubleshooting LV-CAN200, ALL-CAN300, CAN-CONTROL
From Wiki Knowledge Base | Teltonika GPS
Revision as of 14:44, 12 October 2018 by Mantas.gadliauskas (talk | contribs) (Created page with "{| class="wikitable" |- ! Occurring problem !! Possible cause !! Solution |- | '''''Can't set the program number indicated on the scheme''''' || No program number in the CAN a...")
Main Page > Frequently Asked Questions - FAQ > Troubleshooting LV-CAN200, ALL-CAN300, CAN-CONTROL
| Occurring problem | Possible cause | Solution |
|---|---|---|
| Can't set the program number indicated on the scheme | No program number in the CAN adapter module memory. | A software update of CAN adapter module is required
Module software can be updated using Teltonika CAN adapter updater with special Bootloader adapter. CAN adapter can be updated only from software version – 2013-03-18 and revision - 91. Module software and revision version can be checked via SMS command - lvcangetinfo. |
| CAN adapter does not generate data | Example | Example |
| Example | Example | Example |
| Example | Example | Example |
| Example | Example | Example |
| Example | Example | Example |
